Share:
About CNC VERTICAL MACHINING CENTER IPM MV-600D
| ITEMS | UNIT | IPM MV-600D | ||
| TABLE | Size | mm | 750x450 | |
| T Slot (width x no x distance) | mm x T | 16x5x87.5 | ||
| Maximum Table Load | kgs | 300 | ||
| TRAVEL | X, Y, Z Axis | mm | 600x430x450 | |
| Table Top Surface To Spindle Nose | mm | 120-570 | ||
| Distance Between Spindle Center & Column Surface | mm | 490 | ||
| Roller Type Linear Guideway (X / Y / Z Axis) | mm | 30/30/30 | ||
| Ball Screw (X / Y / Z Axis) | mm | ψ32/ψ32/ψ32 | ||
| SPINDLE | Spindle Holder | Direct | ||
| Taper | ISO | BT40 | ||
| Diameter | mm | ψ60 | ||
| Spindle Speed | rpm | 12000 | ||
| FEED | Cutting Feed Rate X Y Z | m/min | 24/24/24 | |
| Rapid Feed Rate X Y Z | m/min | 48/48/36 | ||
| ATC | Type | ARM | ||
| Max. Tool Dia | mm | ψ75 /ψ150 | ||
| Max. Tool Length | mm | 275 | ||
| Max. Tool Weight | kgs | 7 | ||
| Tool Type | CAT40 | |||
| Tool Magazine Capacity | pcs | 20 | ||
| MOTORS | Spindle (Cont./30 min) | kW | 5.5/7.5 | |
| X / Y / Z Axis | kW | 2.2/2.2/4.0 (FANUC) ; 1.5/1.5/3.5 (Mitsubishi) | ||
| Coolant Pump | kW | 0.75 | ||
| ATC Motor | w | 350 | ||
| Air Conditioner | w | 500 | ||
| Spindle Oil Cooler | w | 600 | ||
| Chip Flush Motor | w | 1,290 | ||
| OTHER | Machine Space (L x W) | mm | 1800x2193 | |
| Coolant Tank Capacity | L | 220 | ||
| Net Weight | kgs | 3,600 | ||
| Total Power Consumption | kw | 15 | ||
| TYPES | ACCESSORIES | |
| STANDARD | Full- closed splash guard | ● Screw type chip conveyer |
| X,Y,Z-Axis Telescoplc Guideway cover | ● Automatic tool length measuring device | |
| Oil skimmer system | ●Spindle oil cooler system | |
| Water gun and air gun | FANUC 0i-MF PLUS (type 1) 10.4" LCD controller | |
| Chips flush system | AICC II & DATA SERVER | |
| Tools box | FINE MOLD MACHINING PACK (A02B-0340-R660) | |
| LED work lamp | BLOCK 200PCS | |
| Arm type 20 tools ATC | ||
| Automatic lubrication system | ||
| Heat exchanger for electric cabinet | ||
| 3 color Alarm light | ||
| OPTION | MITSUBISHI M80A 10.4"LCD controller | Voltage regulator |
| SIEMENS controller system | Flat type chip conveyer | |
| Spindle speed 15Krpm | CE | |
| Spindle speed 20K/24Krpm (Built in type) | X,Y,Z-Axis optical scale | |
| Coolant through spindle (20bar) | Breakage detection system | |
| Air conditioner | Oil mist collector | |
| 4th axis interface | Arm type 24 tools ATC | |
Inquiry - CNC VERTICAL MACHINING CENTER IPM MV-600D
