1
Share:
About ROLLER CAM DRIVER CNC TILTING ROTARY TABLE AT200ACR/AT201ACR
| MODEL SPECIFICATIONS | UNIT | AT200ACR | AT201ACR | |||
| Table Diameter | θmm | 200 | 200 | |||
| Table Height (Tilting = 0⁰) | mm | 280 | 285 | |||
| Table Center Height (Tilting = 90⁰) | mm | 230 | 200 | |||
| Spindle Hole | θmm | 15H7 | 15H7 | |||
| T Slot width | mm | 12H7 | 12H7 | |||
| Allowed Works Load | kg | 50 | 70 | |||
| Weight | kg | 200 | 220 | |||
| Rotation Range | Degree | Rotation | Tilting | Rotation | Tilting | |
| 360 | 120 | 360 | 120 | |||
| Motor | Fanuc | α | - | - | α4is | α4isF + B |
| β | β2is | β4is | β4is | β8is + B | ||
| Mitsubishi | HG75S | HG154BS | HG74T | HG103BT | ||
| Gear Ratio (Note) | rpm | 60 | 90 | 60 | 90 | |
| Max. Rotation Speed | 50 | 33.3 | 50 | 33.3 | ||
| Min. Increment | 0.001⁰ | |||||
| Basic Dynamic Load Rating | kg*m | 26 | 58.4 | 26 | 58.4 | |
| Clamp System | kg/cm2 | (H)25 | (H)25 | (H)25 | (H)25 | |
| Output Torque At Brake | kg*m | 25 | 140 | 40 | 80 | |
| N-m | 245 | 1372 | 392 | 784 | ||
| Indexing Accuracy | sec | 20 | 40 | 25 | 40 | |
| Repeatability | sec | 4 | 4 | 4 | 4 | |
| Allowable Work Weight | kg | 50 | 70 | |||
| Allowable Load | Tilting = 0⁰ | kgf | 2200 | 2200 | ||
| Tilting = 0⁰ | L X F (kgf-m) | 100 x 580 | 100 x 580 | |||
| Tilting = 90⁰ | L X F (kgf-m) | 26 | 26 | |||
| Tilting = 90⁰ | L X F (kgf-m) | 100 x 580 | 100 x 580 | |||
| Allowable Work Inertia | kg-m2 | 0.6 | 0.6 | |||
.png)
Inquiry - ROLLER CAM DRIVER CNC TILTING ROTARY TABLE AT200ACR/AT201ACR
