Share:


MACHINE LASER CUTTING GLORYSTAR VS/VA Series

About GLORYSTAR VS/VA Series
 
ITEM 3015 4015 4020 6015 6020 6025
Max material width(mm) 3000*1500 4000*1500 4000*2000 6000*1500 6000*2000 6000*2500
X-axis travel(mm) 1520 1520 2020 1520 2020 2520
Y-axis travel(mm) 3030 4030 4030 6030 6030 6030
Z-axis travel(mm) 290
X/Y axis positioning accuracy ≤0.03mm/m
X/Y axis repeat positioning accuracy ≤±0.02mm
Max. synthetic positioning speed 100m/min
Max. acceleration 1.2G
Cutting kerf width 0.1mm-0.5mm(Actual measured value of plate thickness <3mm)
Cutting surface roughness Ra3.2um- Ra25.4um(Actual measured value of plate thickness <3mm)
Max cutting thickness range Refer to the following process parameter table
Min setting unit 0.001mm
Machine tool footprint(mm) 9800*4500 12000*4500 12000*5000 16150*4500 16150*5000  16150*5000
Host volume(mm) 8800*2700*  1800 10700*2700*  1800 10700*3200* 1800 15150*2700* 1800 15150*3200 *1800 15150*3700*    1800
CNC system Cypcut
Monitor 27″LCD
Transmission Mode Double driver system with Pinion & Rack
Worktable max. weight capacity (T) 1.4 1.88 2.5 2.8 3.7 4.7
Total installed power consumption (approximately) 1000W 15KW 8000W 55KVA
1500W 20KW 12000W 65KVA
2000W 22KW 15000W 80KVA
3000W 27KW    
6000W 42KW    
Power requirements AC380V,50Hz;3P+N+PE
Total power protecting level IP54
The products provided by the company are optimized and upgraded from time to time according to the research and development process. This technical description is suitable for most models.
             
•Specification is subject to change without further notice.        


 Inquiry - MACHINE LASER CUTTING GLORYSTAR VS/VA Series