About JN-T500
MODEL | UNIT | JN-T500 | ||||
TRAVEL | X Axis | mm (inch) | 500 (19.7) | |||
Y Axis | mm (inch) | 400 (15.7) | ||||
Z Axis | mm (inch) | 330 (12.9) | ||||
Spindle Nose To Table | mm (inch) | 150-480(5.9-18.9) | ||||
Spindle Centre To Solid Column Surface | mm (inch) | 430 (16.9) | ||||
TABLE | Working Area | mm(inch) | 650*400 (25.6*15.7) | |||
Max.Loading | kg | 350 | ||||
T-Slots (No.*Width*Pitch) | mm (inch) | 3*14*125 (3*0.5*4.9) | ||||
SPINDLE | Tool Shank | - | BT30 | |||
Speed | rpm | 12,000 (OPT15,000) | ||||
Transmission | - | Direct Drive | ||||
Bearing Lubrication | - | Grease | ||||
Cooling System | - | Oil Cooled | ||||
Spindle Motor Max.Rating | kw(HP) | 7.5 (10) | ||||
Axis Motor Max.Rating (MITSUBISHI) | kw | 1.5/1.5/3.0 | ||||
Axis Motor Max.Rating (FANUC) | kw | 1.8/1.8/2.5 | ||||
FEED RATES | Rapids On X/Y/Z Axis | m/min | 60/60/60 | |||
Max.Cutting Feedrate | m/min | 12/12/12 | ||||
TOOL MAGAZINE | Tool Storage Capacity | pcs | 21 | |||
Type Of Tool (Optional) | type | BT30 | ||||
Max.Tool Diameter | mm(inch) | 60 (2.3) turret | ||||
Max.Tool Weight | kg | 3 | ||||
Max.Tool Length | mm(inch) | 250 (9.8) turret | ||||
AVG. CHANGING TIME (ARM) | Tool To Tool | sec | 0.35 (60HZ) | |||
Air Source Required | kg/cm2 | 6 up | ||||
ACCURACY | Positioning (VDI3341) | mm (inch) | 0.01 (0.0004) | |||
Repeatability | mm (inch) | 0.005 (0.0002) | ||||
DIMENSION | Machine Weight | kg | 5,000 | |||
Power Source Required | KVA | 20 | ||||
Shipping Floor Plan (L*W*H) Water Tank And Chip Conveyor Not Included | mm (inch) | 1,800*2,100*2,200 (70.8*82.7*86.6) | ||||
Floor Plan (L*W*H) | mm (inch) | 1,800*2,600*2,500* (70.8*102.4*98.4) |
STANDARD ACESSORIES | ||
Fanuc Controller | ||
Spindle speed 8000/1000/12000/20000 rpm (depend on machine model) | ||
Automatic tool changer | ||
Full splash guard | ||
Heat exchanger for lectric cabinet | ||
Automatic lubricating system | ||
Spindle air blast system | ||
Spindle oil cooler | ||
Spindle air curtain | ||
Spindle orientation | ||
Coolant gun & air socket | ||
LED light | ||
Rigid tapping | ||
Coolant system & tank | ||
Cycle finish indicator & alarm lights |
Inquiry - CNC DRILL & TAP MACHINE JN-T500