Share:
About CHNCIT JN-NV1050
| MODEL | UNIT | JN-NV1050 | |
| SPINDLE | Tool Shank | - | BT40 (BT50 Opt.) |
| Speed | rpm | 6,000 | |
| Transmission | - | Belt (Gear) Drive | |
| Bearing Lubrication | - | Grease | |
| Cooling System | - | Oil Cooled | |
| Spindle Motor Max.Rating | kw(HP) | 15(20) | |
| Axis Motor Max.Rating (MITSUBISHI) | kw | 2.0 / 3.5 / 3.5 | |
| Axis Motor Max.Rating (FANUC) | kw | 2.5 / 2.5 / 2.5 (Std.) | |
| 3.0 / 3.0 / 4.0 (Opt.) | |||
| TABLE | Working Area | mm | 1,300*550 |
| Max. Loading | kg | 700 | |
| T-Slots (No.*Width*Pitch) | mm | 5*18*125 | |
| TRAVEL | X Axis | mm | 1,050 |
| Y Axis | mm | 550 | |
| Z Axis | mm | 600 | |
| Spindle Nose To Table | mm | 150-750 | |
| Spindle Centre To Solid Column Surface | mm | 566 | |
| FEED RATES | Rapids On X/Y/Z Axis | m/min | 36 / 36 / 36 |
| Max.Cutting Feedrate | m/min | 20 / 20 / 20 | |
| TOOL MAGAZINE | Tool Storage Capacity | pcs | 24 |
| Type Of Tool (Optional) | type | BT40 (BT50 Opt.) | |
| Max. Tool Diameter | mm | 85 | |
| Max. Tool Weight | kg | 7 | |
| Max. Tool Length | mm | 300 | |
| AVG.CHANGING TIME (ARM) | Tool To Tool | Sec | 2.5 |
| Air Source Required | kg/cm2 | 6 up | |
| ACCURACY | Positioning (VDI3341) | mm | 0.01 |
| Repeatability | mm | 0.005 | |
| DIMENSION | Machine Weight | kg | 7,200 / 8,000 |
| Power Source Required | KVA | 30 | |
| Shipping Floor Plan (L*W*H) Water Tank & Chip Conveyor Not Included | mm | 2,900*2,500*2,900 | |
| Floor Plan (L*W*H) | mm | 3,670*2,520*2,870 | |
| •Specification is subject to change without further notice. | |||
| Standard Acessories | |||
| Fanuc Controller | |||
| Spindle Speed 8,000/10,000/12,000/20,000 rpm (Depend On Machine Model) | |||
| Automatic Tool Changer | |||
| Full Splash Guard | |||
| Heat Exchanger For Lectric Cabinet | |||
| Automatic Lubricating System | |||
| Spindle Air Blast System | |||
| Spindle Oil Cooler | |||
| Spindle Air Curtain | |||
| Spindle Orientation | |||
| Coolant Gun & Air Socket | |||
| LED Light | |||
| Rigid Tapping | |||
| Coolant System & Tank | |||
| Cycle Finish Indicator & Alarm Lights | |||
.png)
Inquiry - CNC VERTICAL MACHINING CENTER CHNCIT JN-NV1050
