IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
NEX-110 Series
| Previous | 4 / 7 | Next |
| Model | Unit | NEX-110 | |
| Capacity | Swing Over Bed | mm | 495 |
| Swing on Cross Slide | mm | 400 | |
| Max Swing (on front door) | mm | 560 | |
| Standard Turning Dia | mm | 287 | |
| Max Turning Dia | mm | 400 | |
| Max Turning Length | mm | 657 | |
| Bar Capacity | mm | 75 | |
| Travel | X-Axis Travel | mm | 220 |
| Z-Axis Travel | mm | 710 | |
| Spindle | Spindle Speed | Rpm | 3,500 |
| Chuck Size | 10” & 12” | ||
| Spindle Nose | A2-8 | ||
| Spindle Through Hole Dia | Mm | 86 | |
| Spindle Bearing Diameter | mm | 120 | |
| Spindle No | 1 | ||
| Turret | Turret No | 1 | |
| Type of Turret | T10 | ||
| Height of Square Tool | mm | 25 | |
| Tailstock | Stroke of Tailstock | mm | 580 |
| Tailstock Shaft Hole Dia | mm | 110 | |
| Taper Of Tailstock | MT.5 | ||
| Stroke of Tailstock Shaft | mm | 150 | |
| Feedrate | X-Axis Rapid Traverse Rate | m / min | 18 |
| Z-Axis Rapid Traverse Rate | m / min | 22 | |
| Motor | Spindle Drive Motor | kw | 15/18.5 |
| X Axis Drive Motor | kw | 1.2 | |
| Z Axis Drive Motor | kw | 2.5 | |
| Power | Electric | kva | 35 |
| Tank | Hydraulic | L(kw) | 40(1.5) |
| Coolant Tank | L(kw) | 230(0.4) | |
| Lubrication | L(kw) | 2(0.004) | |
| Size | Height | mm | 2,100 |
| Width | mm | 1,988 | |
| Length | mm | 3,843 | |
| Weight | kg | 5,000 |