IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
HU100-T/100TS
| Previous | 12 / 19 | Next |
5-axes Control Horizontal Machining Center(Table on Table)
¢HU50-T have φ360 palette four APC as standard specifications. Other specifications including 400 palette APC models, φ360 fixed table models, automatic work piece change by 50T taper tool shank are available.
¢By adopting integrated B axis and C axis and three roller bearing, rigidity is improved.
¢Indexing speed of B axis and C axis is unprecedented (Rapid feed /cutting feed rate of 30 min-1 at both B axis and C axis). In addition, rapid rising is realized.
OP= Option
HU100-T
¢This is a built-in type horizontal 5 Axes machining center where C-axis table is placed on the B axis. ¢HU50-T have φ360 palette four APC as standard specifications. Other specifications including 400 palette APC models, φ360 fixed table models, automatic work piece change by 50T taper tool shank are available.
¢By adopting integrated B axis and C axis and three roller bearing, rigidity is improved.
¢Indexing speed of B axis and C axis is unprecedented (Rapid feed /cutting feed rate of 30 min-1 at both B axis and C axis). In addition, rapid rising is realized.
Specification
| Item | Unit | HU100-T | |
| Stroke | X-axis | mm | 1,300 |
| Y-axis | mm | 1,000 | |
| Z-axis | mm | 1,000 | |
| B-axis | ° | -90゛+180 | |
| C-axis | ° | 360 | |
| Table | Palette size | mm | φ600 |
| Maximum loading weight | kg | 600 | |
| Spindle | Taper | ISO 7/24 Taper No.50 | |
| Spindle rotation speed | min-1 | 15 ゛ 4,500 | |
| Rapid feed rate | X、Y、Z-axis | m/min | 15 |
| B-axis | °/min | 10 | |
| C-axis | °/min | 10 | |
| APC | Not available | ||
| ATC | Number of tools to be strored | pcs. | 60 |
| Machine weight | Kg | About 3,000 | |