IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
DSG-2A1224/3A1224/1224CAHD/1224AND
| Previous | 4 / 22 | Next |
| DESCRIPTION | UNIT | 3A1224 | 3A1224H | |||||
| General Capacity | Table size (lxw) | mm | 300x600 | |||||
| Max.grinding length | mm | 650 | ||||||
| Max.grinding width | mm | 340 | ||||||
| Distance from table surface to spindle center | mm | 600/700(opt.) | ||||||
| Standard mag. Chuck size | mm | 300x600 | ||||||
| Longitudinal Movement | Manual travel | mm | 700 | |||||
| Hydraulic traverse | mm | 650 | ||||||
| Hydraulic feed (table speed) approx. | m/min | 1~19 | ||||||
| Cross Movement | Manual travel | mm | 340 | |||||
| Auto cross feed | mm | 310 | ||||||
| Hand feed per revolution | mm | 5 | ||||||
| Hand feed per graduation | mm | 0.02 | ||||||
| Continuous cross feed (approx.)50/60HZ | mm/min | 1100 | ||||||
| Increment cross feed | mm/min | 1~20 | ||||||
| Vertical Downfeed | Rapid traverse (approx.) | mm/min | 800 | |||||
| Hand feed per revolution | mm | 1mm | ||||||
| Hand feed per graduation | mm | 0.005mm | ||||||
| Manual pulse generator | x1,x5x10 | |||||||
| Grinding Wheel | Wheel size (diax width xbore) | mm | Ø355x38x127 | |||||
| Spindle speed (50/60HZ) | r.p.m | 1450/1750 | ||||||
| Motor | Spindle drive motor | HP | 5/7.5(opt.) | |||||
| Hydraulic motor | HP | 2 | ||||||
| Cross feed motor | W | 80 | ||||||
| Elevating motor | W | 80 | ||||||
| Rapid hand elevatipn servo motor | W | 400 | ||||||
| Weight | Net weight / gross weight (approx.) | kg | 2350/2550 | |||||
| Packing Size | Length × width × height | mm | 2400x1900x2280 | |||||