IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
DSG-2040 Series
| Previous | 18 / 28 | Next |
| DESCRIPTION | UNIT | DSG-3A2040H | DSG-2040AND | |
| General Capacity | Table size (lxw) | mm | 500x1050 | |
| Max.grinding length | mm | 1050 | ||
| Max.grinding width | mm | 500 | ||
| Distance from table surface to spindle center | mm | 600/800(opt.) | ||
| Standard mag. Chuck size | mm | 500x1000 | ||
| Longitudinal Movement | Rapid traverse (approx.) | mm/min | 1000 | |
| Hydraulic traverse | mm | 1100 | ||
| Hydraulic feed (table speed) approx. | m/min | 3~25 | ||
| Cross Movement | Manual travel | mm | 575 | |
| Auto cross feed | mm | 550 | ||
| Hand feed per revolution | mm | 5 | ||
| Hand feed per graduation | mm | 0.02 | ||
| Continuous cross feed (approx.)50/60HZ | mm/min | 1000 | ||
| Increment cross feed | mm/min | 1~20 | ||
| Vertical Downfeed | Rapid traverse (approx.) | mm/min | 1000 | |
| Hand feed per revolution | mm/MPG | 0.1mm/MPG | ||
| Hand feed per graduation | mm/MPG | 0.001mm/MPG | ||
| Auto downfeed rate | mm | 0.001~0.099 | ||
| Jog | mm | 0.001 | ||
| Pre-set spark out times | 0.9(passes) | |||
| Manual pulse generator | x1, x5, x10 | |||
| Grinding Wheel | Wheel size (diax width xbore) | mm | Ø355x38x127 | |
| Spindle speed (50/60HZ) | r.p.m | 1450/1750 | ||
| Motor | Spindle drive motor | HP | 7.5/10(opt.) | |
| Hydraulic motor | HP | 3 | ||
| Cross feed motor | HP | 1/4 (SIEMENS) | ||
| Rapid hand elevatipn servo motor | KW | 1 | ||
| Weight | Net weight / gross weight (approx.) | kg | 5900/6900 | |
| Packing Size | Length × width × height | mm | 3600x2230x2280 | |