IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
FS Series
| Previous | 1 / 11 | Next |
| Model | Unit | FS-2216/20 | FS-2716/20 | FS-3216/20 | FS-4216/20 |
|---|---|---|---|---|---|
| Travel | |||||
| X axis | mm | 2,200 | 2,700 | 3,200 | 4,200 |
| Y axis | mm | 1,600 / 2,000 | |||
| Z axis | mm | 800(1,000-opt.) | |||
| Distance from spindle nose to table | mm | 150-950(150-1,150-opt.) | |||
| Distance between two column | mm | 1,700 / 2,100 | |||
| Working table | |||||
| Table Length | mm | 2,000 | 2,500 | 3,000 | 4,000 |
| Table Width | mm | 1,400 / 1,700 | |||
| Table Load | kg | 8,000 | 9,000 | 10,000 | 12,000 |
| T- Slot (Width x Number x Pitch) | mm | 22x7x180 / 22x9x180 | |||
| Spindle | |||||
| Spindle Taper | - | BT-50 / ISO-50 / CAT-50 | |||
| Spindle Speed | rpm | 4,500(6,000-opt.) | |||
| Spindle motor(cont./30 minutes rated) | kw | 18.5 / 22 (22/26-opt.) | |||
| Feed | |||||
| Rapid Traverse(X/Y/Z) | m/min | 12 / 12 / 15 | 10 / 12 / 15 | ||
| Cutting feedrate | mm/min | 7,000 | |||
| Accuracy | |||||
| Positioning Accuracy | mm | ±0.005 / 300 ; ±0.015 / Full travel | |||
| mm | P0.03 | P0.035 | |||
| Repeatability | mm | ±0.003 | |||
| mm | 0.025 | 0.028 | |||
| ATC | |||||
| Tool magazine capacity | pcs | 32 (24/40/60-opt.) | |||
| Max. tool size (full pocket/next pockets empty) | mm | Ø125/245 | |||
| Max. tool length | mm | 350 | |||
| Max. tool weight | kg | 20 | |||
| Others | |||||
| Power required | kva | 65 | |||
| Pneumatic input pressure | kg/cm2 | 6.5 | |||
| Machine net weight | tons | 20 / 22 | 22 / 24 | 24 / 26 | 28 / 30 |
| Floor space (LxWxH) | m | 8.2x5.1(5.5)x4.7 | 9.2x5.1(5.5)x4.7 | 10.2x5.1(5.5)x4.7 | 12.2x5.1(5.5)x4.7 |