IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
PC Series
| Previous | 2 / 11 | Next |
| Model | Unit | PC-3223/26 | PC-4223/26 | PC-5223/26 | PC-6023/26 |
|---|---|---|---|---|---|
| Travel | |||||
| X axis | mm | 3,200 | 4,200 | 5,200 | 6,000 |
| Y axis | mm | 2,300 / 2,600 | |||
| Z axis | mm | 1,000(1,200-opt.) | |||
| Distance from spindle nose to table | mm | 150-1,150(150-1,350-opt.) | |||
| Distance between two column | mm | 2,500 / 2,800 | |||
| Working table | |||||
| Table Length | mm | 3,000 | 4,000 | 5,000 | 6,000 |
| Table Width | mm | 2,000 | |||
| Table Load | kg | 11,000 | 13,000 | 15,000 | 17,000 |
| T- Slot (Width x Number x Pitch) | mm | 28x11x180 | |||
| Spindle | |||||
| Spindle Taper | - | BT-50 / ISO-50 / CAT-50 | |||
| Spindle Speed | rpm | 4,500(6,000-opt.) | |||
| Spindle motor(cont./30 minutes rated) | kw | 18.5 / 22 (22/26-opt.) | |||
| Feed | |||||
| Rapid Traverse(X/Y/Z) | m/min | 12 / 12 / 12 | 10 / 12 / 12 | 8 / 12 / 12 | |
| Cutting feedrate | mm/min | 7,000 | |||
| Accuracy | |||||
| Positioning Accuracy | mm | ±0.005 / 300 ; ±0.015 / Full travel | |||
| mm | P0.035 | P0.045 | |||
| Repeatability | mm | ±0.003 | |||
| mm | Ps0.028 | Ps0.03 | |||
| ATC | |||||
| Tool magazine capacity | pcs | 32 (24/40/60-opt.) | |||
| Max. tool size (full pocket/next pockets empty) | mm | Ø125/245 | |||
| Max. tool length | mm | 350 | |||
| Max. tool weight | kg | 20 | |||
| Others | |||||
| Power required | kva | 65 | |||
| Pneumatic input pressure | kg/cm2 | 6.5 | |||
| Machine net weight | tons | 35 / 37 | 39 / 41 | 45 / 47 | 50 / 52 |
| Floor space (LxWxH) | m | 10.2x6.5(6.8)x5.4 | 12.8x6.5(6.8)x5.4 | 14.6x6.5(6.8)x5.4 | 16.5x6.5(6.8)x5.4 |