IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
LS SERIES
| Previous | 22 / 27 | Next |
| Model | Unit | LS-4230/35 | LS-5230/35 | LS-6230/35 | LS-8230/35 | LS-10230/35 |
|---|---|---|---|---|---|---|
| Travel | ||||||
| X axis | mm | 4,200 | 5,200 | 6,200 | 8,200 | 10,200 |
| Y axis | mm | 3,000/3,500 | ||||
| Z axis | mm | 1,000 (1,200 - opt.) | ||||
| Spindle nose to table distance | mm | 150-1,150 (150-1,350 - opt.) | ||||
| Distance between columns (max. workpiece width) | mm | 3,200 (3,150)/3,700 (3,650) | ||||
| Work table | ||||||
| Length | mm | 4,000 | 5,000 | 6,000 | 8,000 | 10,000 |
| Width | mm | 2,800 (3,500 - opt.) | ||||
| T slot (width x number x pitch) | - | 28x13x200 (28x17x200 - opt.) | ||||
| Max. table load | kg | 20,000 | 24,000 | 28,000 | 32,000 | 40,000 |
| Spindle | ||||||
| Spindle motor | kW | 22/26 | ||||
| Spindle speed (gear type) | rpm | 4,500 (6,000 - opt.) | ||||
| Spindle taper | - | BT 50 / ISO 50 / CAT 50 | ||||
| Feed | ||||||
| Rapid feed-rate (X/Y/Z) | m/min | 10/10/12 | 8/10/12 | |||
| Cutting feed-rate | mm/min | 7,000 | ||||
| Accuracy | ||||||
| Position accuracy | mm | ±0.005/300; ±0.015/ full travel | ||||
| P0.045 | ||||||
| Repeatability | mm | ±0.003 | ||||
| Ps0.03 | ||||||
| ATC | ||||||
| Tool magazine capacity | pcs | 32 (40/60/90 - opt.) | ||||
| Max. tool length | mm | 350 | ||||
| Max. tool weight | kg | 20 | ||||
| Max. tool size (full tools) | mm | Ø125 | ||||
| Max. tool size (next pocket empty) | mm | Ø245 | ||||
| Others | ||||||
| Power consumption | kVA | 65 | ||||
| Compressed air | kg/cm2 | 6.5 | ||||
| Machine weight (approx.) | tons | 55/57 | 63/65 | 71/73 | 87/89 | 101/103 |
| Floor space (LxWxH) (approx.) | m | 13.8x7.3(7.8)x5.4 | 15.8x7.3(7.8)x5.4 | 17.3x7.3(7.8)x5.4 | 21.7x7.3(7.8)x5.4 | 26.1x7.3(7.8)x5.4 |
| Model | Unit | LS-4240/45 | LS-5240/45 | LS-6240/45 | LS-8240/45 | LS-10240/45 |
|---|---|---|---|---|---|---|
| Travel | ||||||
| X axis | mm | 4,200 | 5,200 | 6,200 | 8,200 | 10,200 |
| Y axis | mm | 4,000/4,500 | ||||
| Z axis | mm | 1,000 (1,200/1,500 - opt.) | ||||
| Spindle nose to table distance | mm | 150~1,150 (150~1,350/150~1,650 - opt.) | ||||
| Distance between columns (max. workpiece width) | mm | 4,200 (4,150)/4,700 (4,650) | ||||
| Work table | ||||||
| Length | mm | 4,000 | 5,000 | 6,000 | 8,000 | 10,000 |
| Width | mm | 2,800 (3,500 - opt.) | ||||
| T slot (width x number x pitch) | - | 28x13x200 (28x17x200 - opt.) | ||||
| Max. table load | kg | 20,000 | 24,000 | 28,000 | 32,000 | 40,000 |
| Spindle | ||||||
| Spindle motor | kW | 22/26 | ||||
| Spindle speed (gear type) | rpm | 4,200 | ||||
| Spindle taper | - | BT 50 / ISO 50 / CAT 50 | ||||
| Feed | ||||||
| Rapid feed-rate (X/Y/Z) | m/min | 10/10/12 | 8/10/12 | |||
| Cutting feed-rate | mm/min | 7,000 | 6,000 | |||
| Accuracy | ||||||
| Position accuracy | mm | ±0.005/300; ±0.015/ full travel | ||||
| P0.045 | ||||||
| Repeatability | mm | ±0.003 | ||||
| Ps0.03 | ||||||
| ATC | ||||||
| Tool magazine capacity | pcs | 32 (40/60/90 - opt.) | ||||
| Max. tool length | mm | 350 | ||||
| Max. tool weight | kg | 20 | ||||
| Max. tool size (full tools) | mm | Ø125 | ||||
| Max. tool size (next pocket empty) | mm | Ø245 | ||||
| Others | ||||||
| Power consumption | kVA | 65 | ||||
| Compressed air | kg/cm2 | 6.5 | ||||
| Machine weight (approx.) | tons | 66/69 | 74/77 | 82/85 | 98/101 | 112/115 |
| Floor space (LxWxH) (approx.) | m | 13.8x8.3(8.8)x5.4 | 15.8x8.3(8.8)x5.4 | 17.3x8.3(8.8)x5.4 | 21.7x8.3(8.8)x5.4 | 26.1x8.3(8.8)x5.4 |