IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
MVL-20M
| Previous | 11 / 27 | Next |
| MODEL | UNIT | MVL-20M | |
| Capacity | Max. Swing Diameter | mm (Inch) | Ø2,500 (98.42) |
| Max. Turning Diameter | mm (Inch) | Ø2,500 (98.42) | |
| Distance From Bite Holder End To Table Surface | mm (Inch) | 0 ̴ 1,825 (0 ̴ 7185) | |
| Max. Turning Height | mm (Inch) | 1,800 (70.86) | |
| Max. Workplace Weight | kg | 15,000 | |
| Table | Table Diameter (Manual Chuck) | mm (Inch) | Ø 2,000 (78.74) |
| Range Of Table Speed (Low) | rpm | 13 ̴ 50 | |
| Range Of Table Speed (High) | rpm | 51 ̴ 200 | |
| Gear Speed | steps | 2 | |
| Max. Of Table Torque | N.m | 55,800 | |
| ATC | ATC (Automatic Tool Changer) | set | 1 |
| Number Of Tool Stations | Random | 12 | |
| Tool Type | BT-50 | ||
| Tool Size | mm (Inch) | 25 / 32 / 40 (1” / 1.25” /1.5”) | |
| Cross Section Of Ram | mm (Inch) | 254 x 254 (10 x 10) | |
| Travel | Horizontal Travel (X-Axis) | mm (Inch) | -1,300+1,510(-51.18+59.44),ref point |
| Vertical Travel (Z-Axis) | mm (Inch) | 1,250 (49.20) | |
| Cross Rail Travel | mm (Inch) | 1,120 (44.08), 4step (5 positions) | |
| Feed Rates | Rapid Rate (X-Axis) | m/min | 10 |
| Rapid Rate (Z-Axis) | m/min | 10 | |
| Cutting Feed Rate | mm/rev | 0.001 ~ 500 | |
| Feed Overide | % | 0 ̴ 150 | |
| Motor | Table Main Motor | kW (HP) | ᾳ60HVi, 60 /75 (80.4/100.5) |
| Feed Servo Motor (X Axis) | kW (HP) | ᾳ30i 7 (9.4) | |
| Feed Servo Motor (Z Axis) | kW (HP) | ᾳ30Bi 7 (9.4) | |
| Milling Spindle Motor | kW (HP) | ᾳP50i(22/30kw) | |
| Cf Axis Motor | kW (HP) | ᾳ30i 7kw (9.4HP) | |
| General | Machine Height | mm | 7,135 |
| Floor Space (L x W) | mm | 8,150 x 6,130 | |
| Machine Weight | kgs | 45,000 | |
| •Specification is subject to change without further notice. | |||