IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
MVL-12M
| Previous | 4 / 27 | Next |
| MODEL | UNIT | MVL-12M | |
| Capacity | Max. Swing Diameter | mm (Inch) | Ø1,600 (62.99) |
| Max. Turning Diameter | mm (Inch) | Ø1,600 (62.99) | |
| Distance From Bite Holder End To Table Surface | mm (Inch) | 0 ̴ 1,155 (0 ̴ 45.47) | |
| Max. Turning Height | mm (Inch) | 1,155 (45.27) | |
| Max. Workplace Weight | kg | 8,000 | |
| Table | Table Diameter (Manual Chuck) | mm (Inch) | Ø 1,250 (49.21) |
| Range Of Table Speed (Low) | rpm | 34 ̴ 103 | |
| Range Of Table Speed (High) | rpm | 104 ̴ 312 | |
| Gear Speed | steps | 2 | |
| Max. Of Table Torque | N.m | 12,400 | |
| ATC | ATC (Automatic Tool Changer) | set | 1 |
| Number Of Tool Stations | Random | 12 | |
| Tool Type | BT-50 | ||
| Tool Size | mm (Inch) | 25 / 32 / 40 (1” / 1.25” /1.5”) | |
| Cross Section Of Ram | mm (Inch) | 240 x 240 (9.44 x 9.44) | |
| Travel | Horizontal Travel (X-Axis) | mm (Inch) | -820 + 1,000 (-32.28 + 39.37) |
| Vertical Travel (Z-Axis) | mm (Inch) | 1,000 (39.37) | |
| Cross Rail Travel | mm (Inch) | 500 (19.68) 2 Steps (3 Positions) | |
| Feed Rates | Rapid Rate (X-Axis) | m/min | 10 |
| Rapid Rate (Z-Axis) | m/min | 10 | |
| Cutting Feed Rate | mm/rev | ‘0.001 ~ 500 | |
| Feed Overide | % | 0 ̴ 150 | |
| Motor | Table Main Motor | kW (HP) | ᾳ40i, 37 /45 (49.6 / 60.3) |
| Feed Servo Motor (X Axis) | kW (HP) | ᾳ30i 7 (9.4) | |
| Feed Servo Motor (Z Axis) | kW (HP) | ᾳ30Bi 7 (9.4) | |
| Milling Spindle Motor | kW (HP) | ᾳP30i (15/18.5kW) | |
| Cf Axis Motor | kW (HP) | ᾳ30i, 7 (9.4) | |
| General | Machine Height | mm | 5,670 |
| Floor Space (L x W) | mm | 5,650 x 5,150 | |
| Machine Weight | kgs | 28,850 | |
| •Specification is subject to change without further notice. | |||