IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
JN-NV1050
| Previous | 2 / 2 | Next |
| Model | Unit | JN-NV1050 | |
| Spindle | Tool Shank | - | BT40 (BT50) |
| Speed | rpm | 6,000 | |
| Transmission | - | Belt (Gear) Drive | |
| Bearing lubrication | - | Grease | |
| Cooling System | - | Oil cooled | |
| Spindle motor max.rating | kw(HP) | 15(20) | |
| Axis motor max.rating (MITSUBISHI) | kw | 2.0/3.5/3.5 | |
| Axis motor max.rating (FANUC) | kw | 2.5/2.5/2.5(std.) / 3.0/3.0/4.0(opt.) | |
| Table | Working area | mm(inch) | 1,300*5,50(51.2*21.7) |
| Max.loading | kg | 700 | |
| T-slots (No.*Width*Pitch) | mm (inch) | 5*18*125(5*0.8*5.0) | |
| Travel | X axis | mm (inch) | 1,050(41.3) |
| Y axis | mm (inch) | 550(21.7) | |
| Z axis | mm (inch) | 600(23.6) | |
| Spindle nose to table | mm (inch) | 150-750(5.9-29.5) | |
| Spindle centre to solid column surface | mm (inch) | 566(22.3) | |
| Feed Rates | Rapids on X/Y/Z axis | m/min | 36/36/36 |
| Max.Cutting Feedrate | m/min | 20/20/20 | |
| Tool Magazine | Tool storage capacity | pcs | 24 |
| Type of tool (optional) | type | BT40 (BT50opt.) | |
| Max.tool diameter | mm(inch) | 85(3.3)arm | |
| Max.tool weight | kg | 7 | |
| Max.tool length | mm(inch) | 300(11.8)arm | |
| Avg.chan ging time (ARM) | Tool to tool | Sec | 2.5 |
| Air source required | kg/cm2 | 6 up | |
| Accuracy | Positioning (VDI3341) | mm (inch) | 0.01(0.0004) |
| repeatability | mm (inch) | 0.005(0.0002) | |
| Dimension | Machine weight | kg | 7,200/8,000 |
| Power source required | KVA | 30 | |
| Shipping Floor Plan (L*W*H) water tank and chip conveyor not included | mm (inch) | 2,900*2,500*2,900(114.2*98.4*114.2) | |
| Floor plan (L*W*H) | mm (inch) | 3,670*2,520*2,870(144.5*99.2*112.9) |
| •Specification is subject to change without further notice. |