IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
VTL-750 Series
| Previous | 3 / 4 | Next |
| Model | Unit | VTL-750 | |
| Capacity | Max Swing | mm | 800 |
| Swing Over Saddle | mm | 750 | |
| Standard Turning Dia | mm | 260 | |
| Max Turning Dia | mm | 750 | |
| Max Turning Length | mm | 698 | |
| Travel | X-Axis Travel | mm | 390 |
| Z-Axis Travel | mm | 722 | |
| Spindle | Spindle Speed | Rpm | 2,000 |
| Chuck Size | 15”(18”opt.) | ||
| Spindle Nose | A2-A11 | ||
| Spindle Through Hole Dia | Mm | 77 | |
| Spindle Bearing Diameter | mm | 160 | |
| Turret | Turret No | 1 | |
| Type of Turret | T12 | ||
| Turning Tool Shank | mm | 32 | |
| Boring Bar Shank Dia | mm | 60 | |
| Milling Tool Shank Dia | mm | - | |
| Feedrate | X-Axis Rapid Traverse Rate | m / min | 20 |
| Z-Axis Rapid Traverse Rate | m / min | 20 | |
| Motor | Spindle Drive Motor | kw | 22/26(30/37opt.) |
| Turret Index Motor | kw | 1.2 | |
| Milling Motor | kw | - | |
| X Axis Drive Motor | kw | 4 | |
| Z Axis Drive Motor | kw | 4(7opt.) | |
| Size | Width | mm | 1,975 |
| Depth | mm | 3,269 | |
| Height | mm | 3,345 | |
| Weight | kg | 9,700 |
•Specification is subject to change without further notice.