IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
VTL-450/450M
| Previous | 20 / 22 | Next |
| Model | Unit | VTL-450 | |
| Capacity | Maximum Swing | mm | 600 |
| Swing Over Saddle | mm | 460 | |
| Standard Turning Diameter | mm | 248 | |
| Max Turning Diameter | mm | 460 | |
| Max Turning Length | mm | 460 | |
| Travel | X-Axis Travel | mm | 265 |
| Z-Axis Travel | mm | 470 | |
| Spindle | Spindle Speed | 2,500 | |
| Chuck Size | 12” | ||
| Spindle Nose | A2-A8 | ||
| Through HoleDia | mm | 77 | |
| Bearing Diameter | mm | 120 | |
| Turret | Number Of Tool | T12 | |
| Turning Tool Shank | mm | 32 | |
| Boring Bar Shank Dia | mm | 50 | |
| Feedrate | X-Axis Rapid Traverse Rate | m / min | 20 |
| Z-Axis Rapid Traverse Rate | m / min | 20 | |
| Motor | Spindle Drive Motor | kw | 22/26 |
| X Axis Drive Motor | kw | 3 | |
| Z Axis Drive Motor | kw | 4 | |
| Size | Height | mm | 3,450 |
| Width | mm | 1,650 | |
| Depth | mm | 2,460 | |
| Weight | kg | 6,500 | |
| •Specification is subject to change without further notice. | |||