IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
VMC-168
| Previous | 3 / 5 | Next |
| Model | Unit | VMC-168 | |
| Spindle | Spindle Taper | No. 50 | |
| Transmission | Belt/Gear | ||
| Spindle Speed | r.p.m. | 8,000 / 6,000 | |
| Table | Table Size | mm | 1,700 x 815 |
| T-Slot Size | mm | 5 x 18 x 150 | |
| Work Area | Mm | 1,500 x 800 | |
| Max. Table Load | kgs | 2,000 | |
| Travel & Feedrate | X Axis | mm | 1,600 |
| Y Axis | mm | 800 | |
| Z Axis | mm | 700 | |
| Distance from Spindle Nose to Table | mm | 200~900 | |
| Distance from Spindle Center to Column Ways | mm | 855 | |
| Rapid Traverse | m/min |
X, Y:15 Z:12 |
|
| Cutting Feedrate | mm/min | X, Y, Z:1~10,000 | |
| ATC | Tool Shank | BT 50 | |
| Pull Stud | MAS P50T-1(45º) | ||
| Magazine Capacity | pcs | 24 | |
|
Max. Tool Diameter (with adjacent pocket empty) |
mm | Ø125 | |
| Max. Tool Length | mm | 300 (11.81'') | |
| Max. Tool Weight | kgs | 15 | |
| ATC Type | Cam Driven Arm Type | ||
| Motor | Spindle(Cont./30min.) | kw(HP) | 18.5/22(25/30) Belt |
| 15/18.5(20/25) Gear | |||
| X/Y/Z Axes(Fanuc) | Kw | 4.0 | |
| Lubrication Pump | Kw | 0.025 | |
| Coolant Pump | Kw | 0.49 | |
| Misc. | Machine Height | mm | 3,320 |
| Floor Space | mm | 4,740 x 3,298 | |
| Machine Weight | kgs | 15,000 | |
| Control | FANUC 0iMD/0iMF |
| •Specification is subject to change without further notice. |