MV-800D Others Malaysia, Johor Bahru (JB), Selangor, Penang, Kuala Lumpur (KL) Supply Supplier Suppliers

IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.

+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015

+607-330 5686

MV-800D

2 / 27

MV-800D

	MODEL	UNIT	MV-800D
Table	Size	mm	900 x 500
	T Slot (width x no x distance)	mm x T	18 x 5 x 90
	Maximum Table Load	kgs	500
Travel	X, Y, Z Axis	mm	810 x 520 x 500
	Table Top Surface To Spindle Nose	mm	100-600
	Distance Between Spindle Center & Column Surface	mm	580
	Roller Type Linear Guideway (X / Y / Z Axis)	mm	35 / 35 / 35
	Ball Screw (X / Y / Z Axis)	mm	40 x 40 x 40
Spindle	Spindle Holder		Direct
	Taper	ISO	BT40
	Diameter	mm	70
	Spindle Speed	rpm	12,000 Direct Spindle
Feed	Cutting Feed Rate X Y Z	m/min	20 / 20 / 20
Feed	Rapid Feed Rate X Y Z	m/min	36 / 36 / 36
ATC	Type		ARM
	Max. Tool Dia	mm	75 / 150
	Max. Tool Length	mm	300
	Max. Tool Weight	kgs	7
	Tool Type		BT40
	Tool Magazine Capacity	pcs	24 (t-T) 2.5 Sec (Inverter)
Motors	Spindle (Cont./30 min)	kW	7.5 / 11 ; 11 / 15 (Option) 15 / 18.5 (Option)
	X / Y / Z Axis	kW	3.1 / 3.0 / 4.0 (Fanuc) ; 3.5 / 3.5 / 4.5 (Mitsubishi)
	Coolant Pump	kW	0.75
	ATC Motor	w	350
	Air Conditioner	w	500
	Spindle Oil Cooler	w	600
	Chip Flush Motor	w	2,580
Other	Machine Space (L x W)	mm	2,200 x 2,250
	Coolant Tank Capacity	L	250
	Net Weight	kgs	5,500

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Ship to Name
Shipping Address
Attachment		*only support gif, jpeg, jpg, png, pdf
Messages*