IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
CW 10 - 70
| ITEM | CW-10 | CW-30 | CW-40 | CW-50 | CW-70 | |
| Machining method | Submerged or Flushing | |||||
| Max.workpiece size | 680x420x150 | 780x500x250 | 880x500x250 | 1,000x690x300 | 1,200x790x300 | |
| (WxDxH)(mm) | ||||||
| Max. workpiece | 250kg | 500kg | 550kg | 800kg | 1,000kg | |
| weight | ||||||
| X,Y axes travel | 300x200(mm) | 400x300(mm) | 500x300(mm) | 600x400(mm) | 800x500(mm) | |
| Z axis travel | 150(mm) | 250(mm) | 250(mm) | 300(mm) | 300(mm) | |
| U,V axes travel | 30x | 50x50(mm) |
|
60x60(mm) | 60x60(mm) | |
| 30(mm) | ||||||
| X-Y axis feed rate | Max. 900mm/min | |||||
| Drive motor | AC Servo Motor | |||||
| (X, Y, U, V) | ||||||
| Wire diameter | ø0.25mm(ø0.15 - 0.3) | |||||
| (standard) | ||||||
| Wire tension | 200-2500gf | |||||
| Wire feeding speed | 0-15m/min | |||||
| Best surface | Ra0.65 | |||||
| roughness | m | |||||
| Max. taper angle | 15°/80 | |||||
| Max.wire | 6kg | 6kg | 6kg | 10kg | 10kg | |
| bobbin weight | ||||||
| Work tank | (S)850x573x375 | (S)970x719x510 | (S)1070x719x480 | (S)1136x900x530 | 1492x972x480 | |
| inner dimensios | (F)920x573x400 | (F)1040x719x450 | (F)1140x719x450 | (F)1272x862x480 | ||
| (WxDxH)(mm) | ||||||
| Machine weight | 1500kg | 2200kg | 2400kg | 2800kg | 4100kg | |
|
480/420 | 690/420 | 830/420 | 1215/420 | 420 | |
| Filter element | Paper filters | |||||
| lon exchange resin | 15 | |||||
| Conductivity control | Standard | |||||
| Fluid temperature control | Auto | |||||
| Outside dimension (WxHxD)(mm) | (S)1100x1400x1290 | (S)1100x1570x1290 | (S)1150x1820x1360 | (S)1200x1800x1470 | 950x1400x1290 | |
| (F)950x1400x1290 | (F)950x1400x1290 | (F)950x1400x1290 | (F)950x1400x1290 | |||
| Net weight | 200kg | 250kg | 260kg | 280kg | 280kg | |
| POWER SUPPLY UNIT | ||||||
| Circuit system | Power MOS transistor | |||||
| Max. output current | 25A | |||||
| Voltage select | 145Volt. | |||||
| IP select | 10 steps | |||||
| Off time select | 50 steps | |||||
| CNC CONTROL UNIT | ||||||
| I/O device | Keyboard, RS-232C, CF CARD | |||||
| Display type | 15' LCD-TFT | |||||
| Control system | IPC, close loop software servo system | |||||
| Control axis | X, Y, Z, U, V, (5 axes) | |||||
| Setting unit | 0.001mm | |||||
|
9999.999mm | |||||
| Interpolation | Linear/Circular | |||||
| Command system | Abs./lnc. | |||||
| Machining feed control | Servo/Const. Feed | |||||
| scaling | 0.001-999.999 | |||||
| Auto 2nd cut system | Re-trace and auto changed machining data | |||||
| Machining condition memory | 0-255 | |||||
| Outside dimensions(WxDxH) | 600x870x1850mm | |||||
|
3ø220V | |||||
| 10ге / 13 KVA | ||||||
| •Specification is subject to change without further notice. |
|
|||||