Share:
About IPM 4S
| ITEMS | UNIT | 4S | |
| Spindle Taper | R8 (NT30) | ||
| Spindle Motor | Kw(HP) | 3HP (3Ph) | |
| Quill Diameter | mm | 86 | |
| Quill Travel | mm | 127 | |
| Vertical Feed | mm/rev | 0.04 / 0.08 / 0.16 | |
| Spindle Feed | rpm | 80-5400 | |
| Voltage | 240V 50Hz | ||
| Longitudinal Travel | mm | 800 | |
| Cross Travel | mm | 400 | |
| Vertical Travel | mm | 400 | |
| Table | mm | 1270 x 254 | |
| Max Loading | mm | 250 | |
| T-slot | mm/min | 3 x 15.75 x 63.5 | |
| Milling Head | TM | ||
| Spindle Nose To Working Surface | mm/min | 0-410 | |
| Overarm Travel B05 | mm | 500 | |
| Overarm Swivel | FBLR +/- 45º | ||
| Machine Measurement | mm | 1905 x 1700 x 2100 | |
| Distance From Spindle To Worktable | mm | 410 (480/550) | |
| Workbench Load | kgs | 300 | |
| Machine Weight | kgs | 1210 | |
| TYPES | ACCESSORIES |
| STANDARD | X & Y Axis DRO |
| X Axis Power Feed | |
| 6" Angle Lock Vise | |
| Clamping Kit | |
| Coolant System | |
| R8 Collet Set | |
| Auto Lubrication System | |
| Electrical Control Box | |
| LED Working Lamp | |
| Toolbox |
Inquiry - VERTICAL MILLING MACHINE IPM 4S
