Share:
About CHNCIT JN-T700
| Model | Unit | JN-T700 | ||
| TRAVEL | X axis | mm (inch) | 700 | |
| Y axis | mm (inch) | 400 | ||
| Z axis | mm (inch) | 330 | ||
| Spindle nose to table | mm (inch) | 150-480 | ||
| Spindle centre to solid column surface | mm (inch) | 430 | ||
| TABLE | Working area | mm(inch) | 800*400 | |
| Max.loading | kg | 300 | ||
| T-slots (No.*Width*Pitch) | mm (inch) | 3*14*125 | ||
| SPINDLE | Tool Shank | - | BT30 | |
| Speed | rpm | 12,000 (OPT15,000) | ||
| Transmission | - | Direct Drive | ||
| Bearing lubrication | - | Grease | ||
| Cooling System | - | Oil Cooled | ||
| Spindle motor max.rating | kw(HP) | 7.5 (10) | ||
| Axis motor max.rating (MITSUBISHI) | kw | 1.5/1.5/3.0 | ||
| Axis motor max.rating (FANUC) | kw | 1.8/1.8/2.5 | ||
| FEED RATES | Rapids on X/Y/Z axis | m/min | 60/60/60 | |
| Max.Cutting Feedrate | m/min | 12/12/12 | ||
| TOOL MAGAZINE | Tool storage capacity | pcs | 21 | |
| Type of tool (optional) | type | BT30 | ||
| Max.tool diameter | mm(inch) | 60 (2.3) turret | ||
| Max.tool weight | kg | 3 | ||
| Max.tool length | mm(inch) | 250 (9.8) turret | ||
| AVG.CHAN GING TIME (ARM) | Tool to tool | sec | 0.35 (60HZ) | |
| Air source required | kg/cm2 | 6 up | ||
| ACCURACY | Positioning (VDI3341) | mm (inch) | 0.008 | |
| repeatability | mm (inch) | 0.005 | ||
| DIMENSION | Machine weight | kg | 5,000 | |
| Power source required | KVA | 20 | ||
| Shipping Floor Plan (L*W*H) water tank and chip conveyor not included | mm (inch) | 1,961*2,500*2,500 | ||
| Floor plan (L*W*H) | mm (inch) | 1,961*2,500*2,500 | ||
| •Specification is subject to change without further notice. | ||||
Inquiry - CNC DRILL & TAP MACHINE CHNCIT JN-T700
view more about
Chncit
