IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
NEX-105K
| Previous | 2 / 41 | Next |
| ITEMS | UNIT | NEX-105K | |
| CAPACITY | Swing Over Bed | mm | 120 |
| Swing On Cross Slide | mm | 480 | |
| Max Swing (On Front Door) | mm | 230 | |
| Max Turning Dia | mm | 120 | |
| Max Turning Length | mm | 90 | |
| Bar Capacity | mm | 26 | |
| TRAVEL | X-Axis Stroke | mm | 400 |
| Z-Axis Stroke | mm | 200 | |
| SPINDLE | Spindle Speed | rpm | 6,000 |
| Chuck Size | 5” | ||
| Spindle Nose | A2-4 | ||
| Spindle Through HoleDia | mm | 35 | |
| Spindle Bearing Diameter | mm | 65 | |
| Spindle No. | 1 | ||
| TURRET | Type of Turrent | Gang Type | |
| Height of Square Tool | mm | 16 | |
| Dia of Boring Bar Hole | mm | 20 | |
| FEEDRATE | X-Axis Rapid Traverse Rate | m / min | 24 |
| Z-Axis Rapid Traverse Rate | m / min | 30 | |
| MOTOR | Spindle Drive Motor | kw | 5.5/7.5 |
| X Axis Drive Motor | kw | 1.2 | |
| Z Axis Drive Motor | kw | 1.2 | |
| POWER | Electric | kva | 13.7 |
| TANK | Hydraulic | L(kw) | 20 |
| Coolant Tank | L(kw) | 90 | |
| Lubrication | L(kw) | 2 | |
| SIZE | Height | mm | 1,810 |
| Width | mm | 1,340 | |
| Length | mm | 1,523 | |
| Weight | kg | 2,400 | |
| •Specification is subject to change without further notice. | |||