IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
NEX-106
| Previous | 3 / 41 | Next |
| ITEMS | UNIT | NEX-106 | |
| CAPACITY | Swing Over Bed | mm | 350 |
| Swing on Cross Slide | mm | 280 | |
| Max. Swing (on front door) | mm | 445 | |
| Standard Turning Dia | mm | 190 | |
| Max Turning Dia | mm | 240 | |
| Max Turning Length | mm | 288 | |
| Bar Capacity | mm | 43 | |
| TRAVEL | X-Axis Stroke | mm | 140 |
| Z-Axis Stroke | mm | 350 | |
| SPINDLE | Spindle Speed | rpm | 5,000 |
| Chuck Size | 6” | ||
| Spindle Nose | FLAT140 | ||
| Spindle Through HoleDia | mm | 56 | |
| Spindle Bearing Dia | mm | 80 | |
| Spindle No. | 1 | ||
| TURRET | Turrent No | 1 | |
| Type of Turret | T12 | ||
| Height of Square Tool | mm | 20 | |
| TAILSTOCK | Stroke of Tailstock | mm | 290 |
| Tailstock Shaft Hole Dia | mm | 75 | |
| Taper of Tailstock | MT.4 | ||
| Stroke of Tailstock Shaft | mm | 100 | |
| FEEDRATE | X-Axis Rapid Traverse Rate | m / min | 24 |
| Z-Axis Rapid Traverse Rate | m / min | 30 | |
| MOTOR | Spindle Motor | kw | 5.5/7.5 |
| Servo Motor X-Axis | Kw | 1.2 | |
| Servo Motor Z-Axis | kw | 2.5 | |
| POWER | Electric | kva | 19 |
| TANK | Hydraulic | L(kw) | 40(1.5) |
| Coolant Tank | L(kw) | 160(0.4) | |
| Lubrication | L(kw) | 2(0.004) | |
| SIZE | Height | mm | 1,720 |
| Width | mm | 1,530 | |
| Length | Mm | 1,950 | |
| Weight | kg | 3,500 | |
| •Specification is subject to change without further notice. | |||