IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+607-330 5686

DSG-618/1A618/2A618/3A618/618CAHD/618AND

Previous 2 / 9 Next

DSG-618/1A618/2A618/3A618/618CAHD/618AND Dowell


  MODEL UNIT 618
1A618
2A618
General Capacity Table Size mm 150 x 460
Max.grinding length mm 475
Max.grinding width mm 160
Distance from table surface to spindle center mm 400
Standard mag.Ghuck size mm 150x450
Longitudinal Movement Manual travel mm 485
Hydraulic traverse  mm 485
Hydraulic feed (table speed) approx. m/min 1-25
Cross Movemen Manual travel mm 180
Auto cross feed mm 180
Hand feed per revolution mm 5
Hand feed per graduation mm 0.02
Continuous cross feed (approx.)50/60HZ m/min 510/650
Increment cross feed m/min 0.5-10
Vertical downfeed Rapid traverse (approx.) m/min -
Slow traverse (approx.) m/min -
Hand feed per revolution mm 1mm  AND : 0.1MM/MPG
Hand feed per graduation mm 0.005   AND : 0.001mm/MPG
Auto downfeed rate mm -
Jog mm -
Pre-set spark out times   -
Manual pulse generator   -
Grinding Wheel
 
Wheel size (diax width xbore) mm Ø180x13x31.75mm
Spindle speed (50/60HZ) rpm 3000/3600rpm
 
Motors
Spindle drive motor hp 1.5HP
Hydraulic motor hp 1HP
Cross feed motor w 25
  Elevating motor w 40
  Rapid hand elevatipn servo motor w 400
Weight Net weight/gross weight(approx.) kg 910/1040
Packing size Lengthxwidthxheight mm 1560x1300x2200
•Specification is subject to change without further notice.
 
  MODEL UNIT 3A618
618CAHD
618AND
General Capacity Table Size mm 150 x 460
Max.grinding length mm 475
Max.grinding width mm 160
Distance from table surface to spindle center mm 400
Standard mag.Ghuck size mm 150x450
Longitudinal Movement Manual travel mm 485
Hydraulic traverse  mm 485
Hydraulic feed (table speed) approx. m/min 1-25
Cross Movemen Manual travel mm 180
Auto cross feed mm 180
Hand feed per revolution mm 5
Hand feed per graduation mm 0.02
Continuous cross feed (approx.)50/60HZ m/min 510/650
Increment cross feed m/min 0.5-10
Vertical downfeed Rapid traverse (approx.) m/min 230
Slow traverse (approx.) m/min 29
Hand feed per revolution mm 1mm  AND : 0.1MM/MPG
Hand feed per graduation mm 0.005   AND : 0.001mm/MPG
Auto downfeed rate mm 0.001-0.099
Jog mm 0.001
Pre-set spark out times   0.9(pases)
Manual pulse generator   x1, x5, x10
Grinding Wheel
 
Wheel size (diax width xbore) mm Ø180x13x31.75mm
Spindle speed (50/60HZ) rpm 3000/3600rpm
 
Motors
Spindle drive motor hp 1.5HP
Hydraulic motor hp 1HP
Cross feed motor w 25
  Elevating motor w 40
  Rapid hand elevatipn servo motor w 400
Weight Net weight/gross weight(approx.) kg 910/1040
Packing size Lengthxwidthxheight mm 1560x1300x2200
•Specification is subject to change without further notice.
 
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   

Switch to Mobile Version