Share:


CNC MACHINING TURNING TAKISAWA LS-1000/1000M

About TAKISAWA LS-1000/1000M
 
  ITEMS UNIT LS-1000 LS-1000M
L10/L15/L20/L30 L10/L15/L20/L30
CAPACITY Maximum Swing mm 1,020 1,020
Swing Over Saddle mm 780 780
Standard Turning Diameter mm 320 330
Max Turning Diameter mm 900 850
Max Turning Length mm 1,031/1,531/2,131/3,131 970/1,470/1970/2970
Max Bar Work Capacity mm 180 180
TRAVEL X-Axis Travel mm 500 500
Z-Axis Travel mm 1,100/1,600/2,100/3,100 1,100/1,600/2,100/3,100
SPINDLE Spindle Speed   1,200 (1,000) 1,200 (1,000)
Chuck Size   20” (24”) 20” (24”)
Spindle Nose   A2-15 A2-15
Through Hole Dia mm 200 200
Bearing Diameter mm 266 266
TURRET Number Of Tool Stations   T10 T12
Shank Height For Square Tool mm 32 32
Shank Dia For Boring Bar mm 65 (75) 63
TAILSTOCK Tailstock Travel mm 1,000/1,500/2,000/3,000 1,000/1,500/2,000/3,000
Tailstock Spindle Dia mm 180 180
Taper Hole Of Tailstock Spindle   MT.6 MT.6
Tailstock Spindle Travel mm 150 150
FEEDRATE X-Axis Rapid Traverse Rate m / min 12 12
Z-Axis Rapid Traverse Rate m / min 16 / 16 / 16 / 12 16 / 16 / 16 / 12
MOTOR Spindle Drive Motor kw 30/37 (37/45) 30/37 (37/45)
Turret Index Motor kw 1.2 1.2
Milling Motor Kw   7.5 / 11
X-Axis Drive Motor kw 4 4
Z-Axis Drive Motor kw 6 6
SIZE Height mm 2,590 2,590
Width mm 5,062/5,562/6,062/7,062 5,062/5,562/6,062/7,062
Depth mm 2,180 2,180
Weight kg 12,000/13,500/16,500/18,000 12,000/13,500/16,500/18,000
         
  •Specification is subject to change without further notice.      
 
 
 
 

 Inquiry - CNC MACHINING TURNING TAKISAWA LS-1000/1000M