IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
VMC 95
| Previous | 4 / 9 | Next |
VMC-95
High-Rigidity Structure
High-Rigidity Structure
| Model | Unit | VMC-95 | ||
| Spindle | Spindle Taper | No. 40 | ||
| Transmission | Belt | |||
| Spindle Speed | r.p.m. | 8,000 | ||
| Table | Table Size | mm |
1,050 x 580 (41.34" x 22.83") |
|
| T-Slot Size | mm |
18 x 5 x120 (0.71" x 5 x 4.72") |
||
| Work Area | mm |
900 x 550 (35.43" x 21.65") |
||
| Max. Table Load | kgs(lbs) | 800 (1,760) | ||
| Travel & Feedrate | X Axis | mm | 900 (35.43") | |
| Y Axis | mm | 550 (21.65") | ||
| Z Axis | mm | 580 (22.83") | ||
| Distance from Spindle Nose to Table | mm | 170~750(6.69"~29.53") | ||
| Distance from Spindle Center to Column Ways | mm | 610 (24.02") | ||
| Rapid Traverse | m/min(IPM) |
X, Y:20 (787) Z:15 (590) |
||
| Cutting Feedrate | mm/min(IPM) | X, Y, Z:1~10,000 (393) | ||
| ATC | Tool Shank | BT/CAT 40 | ||
| Pull Stud | MAS P40T-1(45º) | |||
| Magazine Capacity | 24 Tool(standard)/16 tool (option) | |||
|
Max. Tool Diameter (with adjacent pocket empty) |
mm | Ø130(5.12") | ||
| Max. Tool Diameter (full storage) | mm |
Armless=Ø100 (3.94") Arm=Ø80(3.15")(option) |
||
| Max. Tool Length | mm | 300 (11.81") | ||
| Max. Tool Weight | kgs(lbs) | 7 (15.4) | ||
| ATC Type | Arm Type(std.)/Armless Type (opt.) | |||
| Motor | Spindle(Cont./30min.) | kw(HP) | 7.5/11(10/15) | |
| X/Y/Z Axes(Fanuc) | kw(HP) | 3 (4.02) | ||
| Lubrication Pump | kw(HP) | 0.025 (0.033) | ||
| Coolant Pump | kw(HP) | 0.49 (0.66) | ||
| Misc. | Machine Height | mm | 2,640(103.94") | |
| Floor Space | mm | 3,000 x 2,720 (118.11" x 107.09") | ||
| Machine Weight | kgs(lbs) | 6,700(14,740) | ||
| Control | FANUC 0iMD | |||
| Positioning Accuracy (Full Travel) | mm | ±0.005 (±0.0002") | ||
| Repeatability | mm | ±0.003 (±0.00012") | ||
| •Specification is subject to change without further notice. |