Horizontal Machining Center
●Twin ball screw is adopted for driving all axes (X, Y, and Z) to realize the feed rate of 48 m/min and acceleration of 0.5 G, which is the highest in this class.
●Center trough eliminates troubles caused by cutting chips.
●In addition, HW63A is equipped with an access door that opens wide up to the ceiling and swing type operation board that enables a user to face parallel to the work piece in the machine for improved workability at presetting.
OP=Option
FH630R
●Box guide ways realize long term high-precision and high rigidity. Heat treated box guide ways are installed on the surface which has high straightness and perpendicularity by scraping. ●Twin ball screw is adopted for driving all axes (X, Y, and Z) to realize the feed rate of 48 m/min and acceleration of 0.5 G, which is the highest in this class.
●Center trough eliminates troubles caused by cutting chips.
●In addition, HW63A is equipped with an access door that opens wide up to the ceiling and swing type operation board that enables a user to face parallel to the work piece in the machine for improved workability at presetting.
Specification
Item | Unit | FH630R | |
Stroke | X-axis | mm | 1,000 |
Y-axis | mm | 800 | |
Z-axis | mm | 850 | |
Table | Palette size | mm | 630×630 |
Maximum loading weight | kg | 1,000 | |
Spindle | Taper | ISO 7/24 Taper No.50 | |
Spindle rotation speed | min-1 | 50 ~ 6,000 (OP:15,000) | |
Feed rate | Rapid feed rate | m/min | 48 |
Cutting feed rate(max.) | m/min | 20 | |
APC | 2APC Front side turn type | ||
ATC | Number of tools to be strored | pcs. | 60 |
Machine weight | Kg | About 19,000 |
Inquiry - FH630R