IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
HPX63
| Previous | 5 / 30 | Next |
Horizontal Machining Center
●The load to the column sliding section is reduced by air support for smooth high-speed feed despite the sliding method type ways.
●Highly rigid Y-shaped integrated three-point support bed is adopted.
●Ball screws of all linear axes are placed in the center of the sliding surface to minimize the position difference. (In the case of standard spindle of of HU63A/HU80A)
●Y axis ball screw is adopted twin drive, minimized position difference. (In the case of HPX63)
OP= Option
HPX63
●Box guide ways realize long term high-precision and high rigidity. Heat treated box guide ways are attached to the surface which has high straightness and perpendicularity by scraping. ●The load to the column sliding section is reduced by air support for smooth high-speed feed despite the sliding method type ways.
●Highly rigid Y-shaped integrated three-point support bed is adopted.
●Ball screws of all linear axes are placed in the center of the sliding surface to minimize the position difference. (In the case of standard spindle of of HU63A/HU80A)
●Y axis ball screw is adopted twin drive, minimized position difference. (In the case of HPX63)
Specification
| Item | Unit | HPX63 | |
| Stroke | X-axis | mm | 1,000 |
| Y-axis | mm | 800 | |
| Z-axis | mm | 900 | |
| Table | Palette size | mm | 630×630 |
| Maximum loading weight | kg | 1,200 | |
| Spindle | Taper | ISO 7/24 Taper No.50 | |
| Spindle rotation speed | min-1 |
15 ～ 6,000 (OP：15,000/20,000) |
|
| Feed rate | Rapid feed rate | m/min | 32 |
| Cutting feed rate(max.) | m/min | ||
| APC | 2APC Front side turn type | ||
| ATC | Number of tools to be strored | pcs. | 60 |
| Machine weight | Kg | About 18,000 | |