Horizontal Machining Center 'HU'series
●The load to the column sliding section is reduced by air support for smooth high-speed feed despite the sliding method.
●Highly rigid Y-shaped integrated three-point support bed is adopted.
●Ball screws of all axes are placed in the center of the sliding surface to minimize the position difference. (In the case of standardi spindle of HU63A/HU80A)
●Y axis ball screw is adopted twin drive, minimized position difference. (In the case of HPX63)
OP= Option
HU50A
●Box guide ways realize long term high-precision and high rigidity. Heat treated box guide ways are attached to the surface which has high straightness and perpendicularity by scraping. ●The load to the column sliding section is reduced by air support for smooth high-speed feed despite the sliding method.
●Highly rigid Y-shaped integrated three-point support bed is adopted.
●Ball screws of all axes are placed in the center of the sliding surface to minimize the position difference. (In the case of standardi spindle of HU63A/HU80A)
●Y axis ball screw is adopted twin drive, minimized position difference. (In the case of HPX63)
Specification
Item | Unit | HU50A | |
Stroke | X-axis | mm | 720 |
Y-axis | mm | 700 | |
Z-axis | mm | 650 | |
Table | Palette size | mm | 500×500 |
Maximum loading weight | kg | 800 | |
Spindle | Taper | ISO 7/24 Taper No.40 | |
Spindle rotation speed | min-1 | 80 ~ 8,000 (OP:12,000/20,000) |
|
Feed rate | Rapid feed rate | m/min | 36 |
Cutting feed rate(max.) | m/min | 20 | |
APC | 2APC Front side turn type | ||
ATC | Number of tools to be strored | pcs. | 60 |
Machine weight | Kg | About 12,000 |
Inquiry - HU50A/50A-5X