IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
HU100-5X
| Previous | 16 / 30 | Next |
5-axes Control Horizontal Machining Center(Trunnion)
¡ñA wide variety of palette sizes from 500 to 1000 are available.
¡ñThe center of rotation of A axis is higher than the palette, so rigidity against processing thrust is high and effect of index precision is low.
¡ñB axis sliding surfaces adopts hybrid method of sliding and rolling, which has both the rigidity of sliding and smooth motion of rolling.
¡ñA fastest A and B axes indexing speed in the class reduces process time.
OP= Option
HU100-5X
¡ñWe have the No. 1 delivery record of trunnion type horizontal 5 axes machining centers.¡ñA wide variety of palette sizes from 500 to 1000 are available.
¡ñThe center of rotation of A axis is higher than the palette, so rigidity against processing thrust is high and effect of index precision is low.
¡ñB axis sliding surfaces adopts hybrid method of sliding and rolling, which has both the rigidity of sliding and smooth motion of rolling.
¡ñA fastest A and B axes indexing speed in the class reduces process time.
Specification
| Item | Unit | HU100-5X | |
| Stroke | X-axis | mm | 1,300 |
| Y-axis | mm | 1,200 | |
| Z-axis | mm | 1,200 | |
| A-axis | ° | +5¡«-95 | |
| B-axis | ° | 360 | |
| Table | Palette size | mm | 1,000×1,000 |
| Maximum loading weight | kg | 2,000 | |
| Spindle | Taper | ISO 7/24 Taper No.50 | |
| Spindle rotation speed | min-1 |
15¡«4,500 £¨OP£º12,000) |
|
| Rapid feed rate | X¡¢Y¡¢Z-axis | m/min | XYZ£º12 |
| A-axis | °/min | 4 | |
| B-axis | °/min | 6 | |
| APC | OP£º2/4/6/8/10 | ||
| ATC | Number of tools to be strored | pcs. | 60 (OP£º90/120/180/240/360) |
| Machine weight | Kg | About 35,000 | |