IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
VU50A
| Previous | 24 / 30 | Next |
Vertical Machining Center 'VU'series
●X and Y axes realize smooth movement by the sliding surfaces of the rolling guide ways and Z axis sliding surfaces realize rigidity by sliding guide ways.
●The straightnes and perpendicularity are adjusted by scraping on the mounting surface of guide rail. So the precision can be maintained not only at initial term but also for a long term.
OP=Option
VU50A
●12,000 min-1 spindle which is standard equipment, is directly driven and heat displacement is minimal because the motor and the spindle are heat insulated. ●X and Y axes realize smooth movement by the sliding surfaces of the rolling guide ways and Z axis sliding surfaces realize rigidity by sliding guide ways.
●The straightnes and perpendicularity are adjusted by scraping on the mounting surface of guide rail. So the precision can be maintained not only at initial term but also for a long term.
Specification
| Item | Unit | VU50A | |
| Stroke | X-axis | mm | 700 |
| Y-axis | mm | 500 | |
| Z-axis | mm | 450 | |
| Table | Palette size | mm | 1,100×580 |
| Maximum loading weight | kg | 600 | |
| Spindle | Taper | - | ISO 7/24 Taper No.40 |
| Spindle rotation speed | min-1 |
120～12,000 (OP：20,000) |
|
| Feed rate | Rapid feed rate | m/min | X：36 YZ：24 |
| ATC | Number of tools to be strored | pcs. | 20 （OP：30/40/60） |
| Machine weight | Kg | About 9,400 | |