IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
VL30
| Previous | 28 / 30 | Next |
Linear Motor Driven High-speed Precision Center 'VL'series
●Rapid feed, cutting feed (X, Y, Z) of 40 m/min and acceleration of 1 G are realized at 0.1 μm control.
●To realize acceleration of 1 G, movable parts are adapted and immovable parts are constructed heavier for high rigidity.
●Realize excellent high-speed responsiveness of micro step feed precise procesing according to directiveness from minnutes hole processing to three-dimensional micro step block processing.
●DD (direct drive) motors are adopted to rotary axis (C axis) and tile axis (A axis) to achieve prodigious rotation rate (VL30-5X).
※The spindle can be selected the following 3 types.
VL30
●By adopting linear motors on all axes, backlash and lost motion that are inevitable in traditional feeding mechanism are eliminated and high speed and high precision cutting become enabled. ●Rapid feed, cutting feed (X, Y, Z) of 40 m/min and acceleration of 1 G are realized at 0.1 μm control.
●To realize acceleration of 1 G, movable parts are adapted and immovable parts are constructed heavier for high rigidity.
●Realize excellent high-speed responsiveness of micro step feed precise procesing according to directiveness from minnutes hole processing to three-dimensional micro step block processing.
●DD (direct drive) motors are adopted to rotary axis (C axis) and tile axis (A axis) to achieve prodigious rotation rate (VL30-5X).
Specification
| Item | Unit | VL30 | ||
| Stroke | X-axis | mm | 200 | |
| Y-axis | mm | 300 | ||
| Z-axis | mm | 200 | ||
| A-axis | ° | ― | ||
| C-axis | ° | ― | ||
| Table | Palette size | mm | 300×400 | |
| Maximum loading weight | kg | 200 | ||
| Feed rate | Rapid feed rate | X、Y、Z-axis | m/min | 40 |
| A/C-axis | min-1 | ― | ||
| ATC | Number of tools to be strored | pcs. | 12 | |
| Machine weight | Kg | About 5,800 | ||
| Item | Unit | typeⅠ | typeⅡ | typeⅢ | |
| Spindle | Taper | HSK-E25 | HSK-E32 | HSK-E40 | |
| Spindle rotation speed | min-1 | 500～50,000 | 300～30,000 | 250～25,000 | |