IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
VL50
Previous | 29 / 30 | Next |
Linear Motor Driven High-speed Precision Center 'VL'series
¡ñRapid feed, cutting feed (X, Y, Z) of 40 m/min and acceleration of 1 G are realized at 0.1 μm control. ¡¡¡¡¡¡¡¡¡¡¡¡¡¡
¡ñTo realize acceleration of 1 G, movable parts are adapted and immovable parts are constructed heavier for high rigidity. ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
¡ñRealize excellent high-speed responsiveness of micro step feed precise procesing according to directiveness from minnutes hole processing to three-dimensional micro step block processing. ¡¡¡¡¡¡¡¡¡¡
¡ñDD (direct drive) motors are adopted to rotary axis (C axis) and tile axis (A axis) to achieve prodigious rotation rate (VL30-5X).
¡ùThe spindle can be selected the following 3 types.
VL50
¡ñBy adopting linear motors on all axes, backlash and lost motion that are inevitable in traditional feeding mechanism are eliminated and high speed and high precision cutting become enabled. ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡ñRapid feed, cutting feed (X, Y, Z) of 40 m/min and acceleration of 1 G are realized at 0.1 μm control. ¡¡¡¡¡¡¡¡¡¡¡¡¡¡
¡ñTo realize acceleration of 1 G, movable parts are adapted and immovable parts are constructed heavier for high rigidity. ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
¡ñRealize excellent high-speed responsiveness of micro step feed precise procesing according to directiveness from minnutes hole processing to three-dimensional micro step block processing. ¡¡¡¡¡¡¡¡¡¡
¡ñDD (direct drive) motors are adopted to rotary axis (C axis) and tile axis (A axis) to achieve prodigious rotation rate (VL30-5X).
Specification
Item | Unit | VL50 | ||
Stroke | X-axis | mm | 400 | |
Y-axis | mm | 300 | ||
Z-axis | mm | 200 | ||
A-axis | ° | ¨D | ||
C-axis | ° | ¨D | ||
Table | Palette size | mm | 500×400 | |
Maximum loading weight | kg | 400 | ||
Feed rate | Rapid feed rate | X¡¢Y¡¢Z-axis | m/min | 40 |
A/C-axis | min-1 | ¨D | ||
ATC | Number of tools to be strored | pcs. | 16 | |
Machine weight | Kg | About 7,000 |
Item | Unit | type¢ñ | type¢ò | type¢ó | |
Spindle | Taper | HSK-E25 | HSK-E32 | HSK-E40 | |
Spindle rotation speed | min-1 | 500¡«50,000 | 300¡«30,000 | 250¡«25,000 |