IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
VL30-5X
Previous | 30 / 30 | Next |
Linear Motor Driven High-speed Precision Center 'VL'series
ก๑Rapid feed, cutting feed (X, Y, Z) of 40 m/min and acceleration of 1 G are realized at 0.1 μm control. กกกกกกกกกกกกกก
ก๑To realize acceleration of 1 G, movable parts are adapted and immovable parts are constructed heavier for high rigidity. กกกกกกกกกกกกกกกก
ก๑Realize excellent high-speed responsiveness of micro step feed precise procesing according to directiveness from minnutes hole processing to three-dimensional micro step block processing. กกกกกกกกกก
ก๑DD (direct drive) motors are adopted to rotary axis (C axis) and tile axis (A axis) to achieve prodigious rotation rate (VL30-5X).
ก๙The spindle can be selected the following 3 types.
VL30-5X
ก๑By adopting linear motors on all axes, backlash and lost motion that are inevitable in traditional feeding mechanism are eliminated and high speed and high precision cutting become enabled. กกกกกกกกกกกกกกกกกกกกกกกกกกก๑Rapid feed, cutting feed (X, Y, Z) of 40 m/min and acceleration of 1 G are realized at 0.1 μm control. กกกกกกกกกกกกกก
ก๑To realize acceleration of 1 G, movable parts are adapted and immovable parts are constructed heavier for high rigidity. กกกกกกกกกกกกกกกก
ก๑Realize excellent high-speed responsiveness of micro step feed precise procesing according to directiveness from minnutes hole processing to three-dimensional micro step block processing. กกกกกกกกกก
ก๑DD (direct drive) motors are adopted to rotary axis (C axis) and tile axis (A axis) to achieve prodigious rotation rate (VL30-5X).
Specification
Item | Unit | VL30-5X | ||
Stroke | X-axis | mm | 200 | |
Y-axis | mm | 300 | ||
Z-axis | mm | 200 | ||
A-axis | ° |
+40 กซ -110 ฃจIndexing 0.0001°ฃฉ |
||
C-axis | ° | 360 ฃจIndexing 0.0001°ฃฉ | ||
Table | Palette size | mm | φ180 | |
Maximum loading weight | kg | 20 | ||
Feed rate | Rapid feed rate | XกขYกขZ-axis | m/min | 40 |
C-axis | min-1 | 100 | ||
A-axis | min-1 | 50 | ||
ATC | Number of tools to be strored | pcs. | 12 | |
Machine weight | Kg | About 6,500 |
Item | Unit | typeข๑ | typeข๒ | typeข๓ | ||
Spindle | Taper | HSK-E25 | HSK-E32 | HSK-E40 | ||
Spindle rotation speed | min-1 | 500กซ50,000 | 300กซ30,000 | 250กซ25,000 | ||