Share:


MACHINE GRINDING DOWELL DSG-3080AND

About  DOWELL DSG-3080AND
 
  ITEMS UNIT 3080AND
GENERAL CAPACITY Table Size mm 750 x 2000
Max.grinding length mm 2000
Max.grinding width mm 750
Distance from table surface to spindle center mm 900
Standard mag.Ghuck size mm 750x2000
LONGITUDINAL MOVEMENT Manual travel mm -
Hydraulic traverse mm 2100
Hydraulic feed (table speed) approx. m/min 3~25
CROSS MOVEMENT  Manual travel mm 800
Auto cross feed mm 800
Hand feed per revolution mm AND : 0.1mm/MPG
Hand feed per graduation mm AND : 0.001mm/MPG
Continuous cross feed (approx.)50/60HZ mm/min 1000
Increment cross feed mm/min 1~20
VERTICAL DOWNFEED Rapid traverse (approx.) mm/min 800
Slow traverse (approx.) mm/min -
Hand feed per revolution mm AND : 0.1mm/MPG
Hand feed per graduation mm AND : 0.001mm/MPG
Auto downfeed rate mm 0.001~0.06mm
Jog mm 0.001
Pre-set spark out times   0~99 (passes)
Manual pulse generator   x1, x5, x10
GRINDING WHEEL Wheel size (diax width xbore) mm Ø510x50x203.2mm
Spindle speed (50/60HZ) rpm 1450/1750
MOTORS Spindle drive motor hp 15/20
Hydraulic motor hp 15
Cross feed motor kw 1
Elevating motor w -
Rapid hand elevatipn servo motor kw 1.5
WEIGHT Net weight/gross weight(approx.) kg 12500/13500
PACKING SIZE Lengthxwidthxheight mm 6700x250x3000
         
•Specification is subject to change without further notice.      
         

 

 Inquiry - MACHINE GRINDING DOWELL DSG-3080AND