IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+607-330 5686

SBM SERIES

Previous 8 / 11 Next

SBM SERIES StarVision


Model Unit SBM-4228 SBM-5228 SBM-6028
Travel    
X axis mm 4,200 5,200 6,000
Y axis mm 2,800
Z axis mm 1,000 (1,200 - opt.)
W axis   1,000 (1,250/1,500 - opt.)
Spindle nose to table distance mm 150-1,150 (650-1,650/1,150-2,150 - opt.)
Distance between columns (max. workpiece width) mm 2,600 (2,550)
Work table    
Length mm 4,000 5,000 6,000
Width mm 2,000
T slot (width x number x pitch) - 28x11x180
Max. table load kg 13,000 15,000 17,000
Spindle    
Spindle motor kW 22/26 (30/37 - opt.)
Spindle speed (gear type) rpm 4,500 (6,000 - opt.)
Spindle taper - BT 50 / ISO 50 / CAT 50
Feed    
Rapid feed-rate (X/Y/Z/W) m/min 10/10/12/2 8/10/12/2
Cutting feed-rate mm/min 7,000
Accuracy    
Position accuracy mm ±0.005/300; 0.015/ full travel
P0.035 P0.045
Repeatability mm ±0.003
Ps0.028 Ps0.03
ATC    
Tool magazine capacity pcs 32 (40/60/90 - opt.)
Max. tool length mm 350
Max. tool weight kg 20
Max. tool size (full tools) mm Ø125
Max. tool size (next pocket empty) mm Ø245
Others    
Power consumption kVA 65
Compressed air kg/cm2 6.5
Machine weight (approx.) tons 62 64 66
Floor space (LxWxH) (approx.) m 13.0x7.8x6.6 14.8x7.8x6.6 16.7x7.8x6.6
All specification are subjected to change without prior notice.



Model Unit SBM-4233/38 SBM-5233/38 SBM-6233/38 SBM-8233/38 SBM-10233/38
Travel    
X axis mm 4,200 5,200 6,200 8,200 10,200
Y axis mm 3,300/3,800
Z axis mm 1,000 (1,200 - opt.)
W axis   1,000 (1,250/1,500 - opt.)
Spindle nose to table distance mm 150-1,150 (650-1,650/1,150-2,150 - opt.)
Distance between columns (max. workpiece width) mm 3,100 (3,050) / 3,600 (3,550)
Work table    
Length mm 4,000 5,000 6,000 8,000 10,000
Width mm 2400 / 2,800 (3,500 - opt.)
T slot (width x number x pitch) - 28x13x180
Max. table load kg 13,000/20,000 15,000/24,000 17,000/28,000 21,000/32,000 25,000/40,000
Spindle    
Spindle motor kW 22/26 (30/37 - opt.)
Spindle speed (gear type) rpm 4,500 (6,000 - opt.)
Spindle taper - BT 50 / ISO 50 / CAT 50
Feed    
Rapid feed-rate (X/Y/Z/W) m/min 10/10/12/2 8/10/12/2
Cutting feed-rate mm/min 7,000
Accuracy    
Position accuracy mm ±0.005/300; ±0.015/ full travel
P0.035 P0.045
Repeatability mm ±0.003
Ps0.028 Ps0.03
ATC    
Tool magazine capacity pcs 32 (40/60/90 - opt.)
Max. tool length mm 350
Max. tool weight kg 20
Max. tool size (full tools) mm Ø125
Max. tool size (next pocket empty) mm Ø245
Others    
Power consumption kVA 65
Compressed air kg/cm2 6.5
Machine weight (approx.) tons 63 65 67 69 71
Floor space (LxWxH) (approx.) m 13.0x
8.3(13.8x8.8)x
6.6
14.8x
8.3(15.8x8.8)x
6.6
17.3x
8.3(8.8)x
6.6
21.7x
8.3(8.8)x
6.6
26.1x
8.3(8.8)x
6.6
All specification are subjected to change without prior notice.



Model Unit SBM-5243/48/53 SBM-6243/48/53 SBM-8243/48/53 SBM-10243/48/53
Travel    
X axis mm 5,200 6,200 8,200 10,200
Y axis mm 4,300/4,800/5,300
Z axis mm 1,000 (1,200/1,500 - opt.)
W axis   1,000 (1,250/1,500 - opt.)
Spindle nose to table distance mm 150-1,150 (650-1,650/1,150-2,150 - opt.)
Distance between columns (max. workpiece width) mm 4,100 (4,050) / 4,600 (4,550) / 5,100 (5,050)
Work table    
Length mm 5,000 6,000 8,000 10,000
Width mm 2,800 (3,500 - opt.)
T slot (width x number x pitch) - 28x13x200 (28x17x200 - opt.)
Max. table load kg 24,000 28,000 32,000 40,000
Spindle    
Spindle motor kW 22/26 (30/37 - opt.)
Spindle speed (gear type) rpm 4,200
Spindle taper - BT 50 / ISO 50 / CAT 50
Feed    
Rapid feed-rate (X/Y/Z/W) m/min 10/10/12/2 8/10/12/2
Cutting feed-rate mm/min 7,000 6,000
Accuracy    
Position accuracy mm ±0.005/300; ±0.015/ full travel
P0.045
Repeatability mm ±0.003
Ps0.03
ATC    
Tool magazine capacity pcs 32 (40/60/90 - opt.)
Max. tool length mm 350
Max. tool weight kg 20
Max. tool size (full tools) mm Ø125
Max. tool size (next pocket empty) mm Ø245
Others    
Power consumption kVA 65
Compressed air kg/cm2 6.5
Machine weight (approx.) tons 82/84/86 85/87/89 92/94/96 98/100/102
Floor space (LxWxH) (approx.) m 15.8x9.3(*)x7 17.3x9.3(*)x7 21.7x9.3(*)x7 26.1x9.3(*)x7
(*) - Machine width of floor space increases in direct proportion against the extension of Y travel
All specification are subjected to change without prior notice.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   

Switch to Mobile Version