IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
LC1- 1/2 VS/TM
| Previous | 1 / 12 | Next |
| SPECIFICATION |
| MODEL | LC-1 1/2 VS | LC-1 1/2 TM |
| Travel | ||
| Longitudinal Travel | 762 mm (30') / Opt: 966 mm (38') | |
| Cross travel | 305 mm (12') | |
| Vertical travel | 406 mm (16') | |
| Table | ||
| Working surface | 1,067 mm X 230 mm (42' X 9') / Opt: 1,270mm (50') | |
| Working surface to ground A01 | 820 ~ 1,226 mm (32.3 ~ 48.3') | |
| Max. load | 200 Kg | |
| T-slots (no. x width x pitch) | 3 X 15.875 mm X 63.5 mm (3 X 0.625' X 2.5') | |
| Machine size | ||
| Length A02 | 1,600 ~1,905 mm (63 ~ 75') | |
| Width A03 | 1,467 mm (57.8') | |
| Height A04 | 2,100 mm (82.7') | 2,000 mm (78.7') |
| Weight | 1,010 kgs (2,222 lbs) | |
| Coolant pump | O | |
| Vertical spindle | ||
| Milling head | VS | TM |
| Quill swivel (R&L/90°) B01 | V | V |
| Quill swivel (F&B) B02 | +45° ~ -38° | ±45° |
| Spindle nose to working surface B03 | 0 ~ 469 mm (0 ~ 18.5') | |
| Spindle centerline to column B04 | 171~ 476 mm (6.75'~18.75') | |
| Overarm travel B05 | 305 mm (12') | |
| Overarm swivel | 360° | |
|
|
| Milling head specification | |||
| Milling Head | VS | TM | |
| Spindle Taper | R8 or NST 30 | R8 or NST 30 | |
| Spindle Motor(3Ph) | 2 HP | 2 HP | |
| Quill Diameter | 85.7 mm | 85.7 mm | |
| Quill Travel | 127 mm (5 ') | 127 mm (5 ') | |
| Vertical Feeds | 0.04/0.08/0.16 mm | 0.04/0.08/0.16 mm | |
| Spindle Speed | 50 HZ | 50~3,750 rpm (Variable) | 60~2,280 rpm (8 Steps) |
| 60 HZ | 60~4,500 rpm (Variable) | 80~2,760 rpm (8 Steps) | |
| Inverter (Option) | O | X | |
| Bigger spindle motor (Option) | 3 HP | 3 HP | |
| Single phase motor (Option) | O | O | |
| 2 speed motor (Option) | X | O | |
| Accessories | ||
| Machine Type | LC1-1/2VS | LC1-1/2TM |
| X and Y axis ballscrews (grade C5) | O | O |
| Power feed system | O | O |
| 8 Speed gear box feed system | O | O |
| 50' long table | O | O |
| Chromed bedways | O | O |
| Scales | O | O |
| Coolant system | O | O |
| Coolant tray | O | O |
| Automatic lubrication system | O | O |
| Halogen light with electric box | O | O |
| 4'(100mm) or 7'(178mm) riser block | O | O |
| Air power drawbar (Vertical) | O | O |
| Tapping Unit | O | O |
|
* Specifications may different according to option accessories and are subject to change without notice. V: Standard ; O: Option ; X: Not Available |