IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
LC-20 SERIES
| Previous | 3 / 12 | Next |
| SPECIFICATION |
| Machine Type | LC-20 VSG | LC-20 VGN | LC-20 VGA | LC-20 VHS | LC-20 VHN | LC-20 VHA | |
| Travel | |||||||
| Longitudinal travel | 800 mm (31.5') / Opt: 920mm (36.2') | ||||||
| Cross travel | 415 mm (16.3') | ||||||
| Vertical travel | 460 mm (18') | 435 mm (17.1') | |||||
| Table | |||||||
| Working Surface | 1,300 mm X 260 mm (51' X 10') / Opt: 1,420mm (56') | ||||||
| Working surface to ground A01 | 910 - 1,370 mm (35.8 - 53.9') | 925 - 1,360 mm (36.4 - 53.5') | |||||
| Max. Loading | 200 Kg | ||||||
| T-slot (no. x width x pitch) | 3 X 15.875 mm X 63.5 mm (3 X 0.625' X 2.5') | ||||||
| Machine Size | |||||||
| Length A02 | 2,110 - 2,580 mm (83.1 - 101.6') | ||||||
| Width A03 | 1,900 mm (74.8') | ||||||
| Height A04 | 2,270 (89.4') | ||||||
| Weight | 1,800 kgs (3,960 lbs) | 2,010 kgs (4,422 lbs) | |||||
| Coolant pump | O | 1/8 HP | |||||
| Vertical Spindle | |||||||
| Milling head | 20 VS | 20 VN | 2 G | 20 VS | 20 VN | 2 G | |
| Quill Swivel (R&L/90°) B01 | V | V | V | V | V | V | |
| Quill Swivel (F&B/45°) B02 | V | V | V | V | V | V | |
| Spindle nose to table | 80~540mm (3.1'~21.3') | 115~550mm (4.5'~21.7') | |||||
| Spindle nose to column surface B04 | 355~825 mm (14'~32.5') | 255~725mm (10'~28.5') | 355~825 mm (14'~32.5') | 255~725mm (10'~28.5') | |||
| Overarm travel B05 | 470 mm (18.5') | ||||||
| Overarm Swivel | 360° | ||||||
| Feed System | |||||||
| Longitudinal | 22~690mm (0.8'~27.2')/ min | ||||||
| Longitudinal rapid feeds | 2100mm (82.7')/ min | ||||||
| Vertical | 800mm (31.5')/ min | ||||||
| Longitudinal motor | 1 / 0.5 HP 4 / 8 P | ||||||
| Vertical motor | 1.5 HP 6P | ||||||
| Horizontal Spindle | |||||||
| Spindle Speed | 50 HZ | X | 45~980 rpm (6 Steps) | ||||
| 60 HZ | X | 55~1,180 rpm (6 Steps) | |||||
| Spindle motor | X | 5 HP 4P | |||||
| Spindle taper | X | NST 40 | |||||
| Spindle centerline to table C01 | X | -25~410 mm (-1~16.1') | |||||
| Spindle centerline to overarm C02 | X | 146 mm (5.7') | |||||
| Spindle centerline to column surface C03 | X | 28 mm (1.1') | |||||
|
|
|
| Milling head specification | ||||
| Milling Head | 20 VS | 20 VN | 2G | |
| Spindle Taper | NST 40 | NST 40 | NST 40 | |
| Spindle Motor(3Ph) | 3 HP | 3 HP | 5 HP | |
| Quill Diameter | 90 mm | 90 mm | 110 mm | |
| Quill Travel | 127 mm (5 ') | 127 mm (5') | 135 mm (5.3') | |
| Vertical Feeds | 0.04/0.08/0.16 mm | 0.04/0.08/0.16 mm | 0.035/0.070/0.14 mm | |
| Spindle Speed | 50 HZ | 50~3,750 rpm (Variable) | 60-3,000 rpm (16 Steps) | 60-3,000 rpm (16 Steps) |
| 60 HZ | 60~4,500 rpm (Variable) | 75-3,600 rpm (16 Steps) | 75-3,600 rpm (16 Steps) | |
| Inverter (Option) | X | O | O | |
| Bigger spindle motor (Option) | 5 HP | 5 HP | X | |
| Single phase motor (Option) | X | X | X | |
| 2 speed motor (Option) | X | O | O | |
| Accessories | ||||||
| Machine Type | LC-20 VSG | LC-20 VGN | LC-20 VGA | LC-20 VHS | LC-20 VHN | LC-20 VHA |
| Y axis ball screws (grade C5) | O | O | O | O | O | O |
| Y power feed | O | O | O | O | O | O |
| 8 Speed grad box feed system for Y-Axis | O | O | O | O | O | O |
| 1420 mm X 260 mm long table | O | O | O | O | O | O |
| Scales | O | O | O | O | O | O |
| Coolant system | O | O | O | V | V | V |
| Coolant tray | O | O | O | V | V | V |
| Automatic lubrication system | O | O | O | O | O | O |
| Halogen light | O | O | O | O | O | O |
| Air power drawbar (Vertical) | O | O | O | O | O | O |
| 5'(127mm) riser block | O | O | O | O | O | O |
| Tapping Unit | O | O | O | O | O | O |
|
* Specifications may different according to option accessories and are subject to change without notice. V: Standard ; O: Option ; X: Not Available |