LC-205 SERIES First Malaysia, Johor Bahru (JB), Selangor, Penang, Kuala Lumpur (KL) Supply Supplier Suppliers

IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.

+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015

+607-330 5686

sales@ipmmalaysia.com

LC-205 SERIES

4 / 12

SPECIFICATION

Machine Type		LC-205 VS	LC-205 VN	LC-205 VSD	LC-205 VHS	LC-205 VHDX	LC-205 VHDN	LC-205 VHD
Travel
Longitudinal		Power feed: 815mm (32') / Manual: 835mm(32.8')		835 mm (32.8') (Manual Max.)	Power feed: 815mm (32')/ Manual: 835mm(32.8')	835 mm (32.8') (Manual Max.)
Cross		380 mm (15')
Vertical		460 mm (18')			435 mm (17.12')
Table
Working surface		1,300 mm X 300 mm (51' X 11.8')
Working surface to ground A01		935 - 1,395 mm (36.8 - 54.9')			935 - 1,370 mm (36.8 - 53.9')
Max. loading		200 Kg
T-slots (no. x width x pitch)		3 X 15.875 mm X 63.5 mm
Machine size
Length A02		2,400 - 2,870 mm (94.5 - 113')
Width A03		2160 mm (85')
Height A04		2,310 (90.9')
Weight		1,800 kgs (3,960 lbs)			2,010 kgs (4,422 lbs)
Coolant pump		O			1/8 HP
Vertical Spindle
Milling head		20 VS	20 VN	2 G	20 VS	20 VS	20 VN	2 G
Quill swivel (R&L/90°) B01		V	V	V	V	V	V	V
Quill swivel (F&B/45°) B02		V	V	O	V	O	O	O
Spindle nose to table surface B03		80~540mm	80~540 mm	40~500 mm	115~550mm	115~550 mm	75~510 mm	75~510 mm
		(3-21.3')	(3-21.3')	(1.5-19.6')	(4.5-21.7')	(4.5-21.7')	(2.9-20')	(2.9-20')
Spindle nose to column surface B04		355~825 mm (14'~32.5')			355~825 mm (14'~32.5')
Overarm travel B05		470 mm (18.5')			470 mm (18.5')
Overarm Swivel		360°			360°
Feed system
Longitudinal		O		22~690mm (0.8'~27.2')/ min	O	22~690mm (0.8'~27.2')/ min
Longitudinal rapid feed		2100mm (82.7')/ min			2100mm (82.7')/ min
Vertical		800mm (31.5')/ min			800mm (31.5')/ min
Longitudinal motor		1, (2) HP / 4 (8) P			1, (2) HP / 4, (8) P
Vertical motor		1.5 HP 6P			1.5 HP 6P
Longitudinal motor (DC Servo/ 4.5Nm)		X	X	V	X	V	V	V
Cross motor (DC Servo/ 4.5Nm)		X	X	V	X	V	V	V
Horizontal spindle
Spindle speed	50 HZ	X			45~980 rpm (6 step)
	60 HZ	X			55~1,180 rpm (6 step)
Motor		X			5 HP 4P
Spindle taper		X			NST 40
Spindle centerline to table C01		X			-25~410 (-1'~16.1')
Spindle centerline to overarm C02		X			146 (5.7')
Spindle centerline to column surface C03		X			28 (1.1')

20VS Head

20VN

2G Head

Milling head specification
Milling Head		20 VS	20 VN	2G
Spindle Taper		NST 40	NST 40	NST 40
Spindle Motor(3Ph)		3 HP	3 HP	5 HP
Quill Diameter		90 mm	90 mm	110 mm
Quill Travel		127 mm (5 ')	127 mm (5')	135 mm (5.3')
Vertical Feeds		0.04/0.08/0.16 mm	0.04/0.08/0.16 mm	0.035/0.070/0.14 mm
Spindle Speed	50 HZ	50~3,750 rpm (Variable)	60-3,000 rpm (16 Steps)	60-3,000 rpm (16 Steps)
Spindle Speed	60 HZ	60~4,500 rpm (Variable)	75-3,600 rpm (16 Steps)	75-3,600 rpm (16 Steps)
Inverter (Option)		X	O	O
Bigger spindle motor (Option)		5 HP	5 HP	X
Single phase motor (Option)		X	X	X
2 speed motor (Option)		X	O	O

Accessories
Machine Type	LC-205 VS	LC-205 VN	LC-205 VSD	LC-205 VHS	LC-205 VHDX	LC-205 VHDN	LC-205 VHD
X & Y axis ball screws (grade C5)	O	O	O	O	O	O	O
X & Y Axis power feed	O	O	X	O	X	X	X
Z-Axis servo motor feed	X	X	O	X	O	O	O
Table guard put on top table (5001300250)	O	O	O	O	O	O	O
Coolant system	O	O	O	V	V	V	V
Coolant tray	O	O	O	V	V	V	V
Automatic Lub. System	O	O	V	O	V	V	V
Halogen light	O	O	O	O	O	O	O
5'(127mm) riser block	O	O	O	O	O	O	O
Tapping Unit	O	O	O	O	O	O	O
Dial Gauge on Quill	X	X	O	X	X	X	O

* Specifications may different according to option accessories and are subject to change without notice.
V: Standard ; O: Option ; X: Not Available

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Ship to Name
Shipping Address
Attachment		*only support gif, jpeg, jpg, png, pdf
Messages*