IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
MCV1000
Previous | 6 / 12 | Next |
SPECIFICATION |
MODEL | MCV1000 |
Travel | |
X-Axis | 1,020 mm (40.2') |
Y-Axis | 510 mm (20') |
Z-Axis | 510 mm (20') |
Spindle nose to table | 120 ~ 630 mm (4.7 ~ 24.8') |
Table | |
Table size | 1150 X 500 mm (45.3X19.7') |
Floor to table | 800 mm(31.5') |
Max. table loading capacity | 1,000 kgs(2200Lbs) |
T-slot (no x Width x Pitch) | 5 X 18 mm X 100 mm (5 X 0.7' X 3.9') |
Spindle center to column | 510 mm (20') |
Feed system | |
Rapid traverse speed | X/Y: 20 M/min ( 787.4'/min), Z:18 M/min (708.7'/min) |
Feed motor(FANUC) |
X/Y: 2.5kW (20 Nm) , Z: 3.0kW (36 Nm) servo motor: X/Y: Beta 22i / Z: Beta 40iB |
Ball screw diameter & pitch |
X/Y/Z: 40 mm / 10mm(1.6'/0.4') servo motor: X/Y: Beta 22i / Z: Beta 40iB |
Cutting feedrate | 1~10,000 mm/min(0.04 ~ 393.7'/min) |
Type of transmission | Direct Drive |
Spindle | |
Type of tool shank | BT 40 / CAT 40 / DIN 69871A |
Max. spindle speed | 8,000 rpm / 10,000 (Op) |
Spindle motor | 11 /15 kW |
Type of transmission | Belt |
ATC | |
Tool storage capacity (Arm-Less) | 24 tools (Op) |
ATC type | Armless type |
Max. tool diameter | 95 mm(3.7') |
Without adjacent tool | 156 mm(6.1') |
Max. tool length | 300 mm(11.8') |
Max. tool weight | 7 kgs(15Lbs) |
Tool changing time (Tool to Tool) | 3.2 sec |
Tool changing time (Chip to Chip) | ¡¡5.5 sec ¡¡ |
Method of tool selection | random selection |
bi-directional magazine rotation | |
Tool display | Yes |
Special tool management | Yes |
Coolant system | |
Coolant tank size | 450 L |
Coolant capacity | 95 L / min |
Chip Flush capacity | 105 L / min |
Machine size | |
Machine height | 2,575 mm (101.3') |
Floor space | 4,085mm(160.8')(W) X 2293 mm(90.2')(D) |
weight | 5,000 kgs (11000Lbs) |
Power source | |
Electrical power supply | 20 KVA / 3PH£¬220V 50/60HZ |
Compressed air supply | 6.0 kgf/c©O (85psi) (0.6MPa) |
Controller | |
FANUC / MITSUBISHI / SIEMENS |
Edition / A01 |
* Specifications may different according to option accessories and are subject to change without notice. |