IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+607-330 5686

MCV850 / MCV1100

Previous 7 / 12 Next

MCV850 / MCV1100 First


SPECIFICATION
 
MODEL MCV850 MCV1100
Travel
X-Axis 850 mm(33.5') 1100 mm(43.3')
Y-Axis 600 mm(23.6')
Z-Axis 100~660 mm(22.0')
Spindle nose to table 70 - 530 mm(3.9-25.9')
Table
Table size 1050mm x 600mm(41.3-23.6')  1300mm x 600mm(51.1-23.6') 
Floor to table 835 mm(33.6')
Max. table loading capacity 1000 kgs(2200Lbs)
T-slot (no x Width x Pitch) 6 x 18 x 100 mm ( 6 x 0.7' x 3.9' )
Spindle center to column 652 mm(25.6')
Feed system
Rapid traverse speed  X/Y: 20 M/min ( 787.4'/min) , Z:15 M/min (590.6'/min)
Feed motor(FANUC) X: 1.8kW (12Nm) , Y: 3.0kW (22Nm), Z: 4.2 kW(30Nm)
Ball screw diameter & pitch X: 40 mm, Y/Z: 45 mm / 10 mm(0.39')
Cutting feedrate 1-10,000 mm/min (0.04 - 393.7'/Min)
Type of transmission Direct Drive
Spindle
Type of tool shank ISO 40
(BT/CAT/DIN 69871A)
ISO 50
(BT/CAT/DIN 69871A)
ISO 40
(BT/CAT/DIN 69871A)
ISO 50
(BT/CAT/DIN 69871A)
Max. spindle speed 8,000 rpm / 10,000 rpm (Op) 6,000 rpm / 8,000 rpm (Op) 8,000 rpm / 10,000 rpm (Op) 6,000 rpm / 8,000 rpm (Op)
Spindle motor 75/11 kW / 11/15 kW (Op) 15/18.5 kW / 22/26 kW (Op) 75/11 kW / 11/15 kW (Op) 15/18.5 kW / 22/26 kW (Op)
Type of transmission Belt
ATC
Tool storage capacity 20T/24 or 32 or 40T (Op) 24T / 30T (Op) 20T/24 or 32 or 40T (Op) 24T / 30T (Op)
ATC type Armless type (Op) Armless type Armless type (Op) Armless type
Max. tool diameter 100/95/76/76 mm (3.9/3.7/3/3.3') 110/127 mm (4.3/5') 100/95/76/76 mm (3.9/3.7/3/3.3') 110/127 mm (4.3/5')
Without adjacent tool 180/185/127/127 mm (7.1/7.3/5/5') 200/228 mm (7.9/9') 180/185/127/127 mm (7.1/7.3/5/5') 200/228 mm (7.9/9')
Max. tool length 300 mm (11.8') 300 mm (11.8') 300 mm (11.8') 300 mm (11.8')
Max. tool weight 7 kg (15Lbs) 15 kgs (33Lbs) 7 Kg (15Lbs) 15 kgs (33Lbs)
Tool changing time
(Tool to Tool)
7 sec / 3.5 sec 5 sec 7 sec / 3.5 sec 5 sec
Tool changing time 
(Chip to Chip)
11 sec / 5.5 sec 7 sec 11 sec / 5.5 sec 7 sec
Method of tool selection 20T by address code / Random selection
bi-directional magazine rotation
Tool display Yes
Special tool management Yes
Coolant system
Coolant tank size 486 L
Coolant capacity 105 L / min
Chip Flush capacity 105 L / min
Machine size
Machine height 2,600 mm 102.3') 2,900 mm 114.7') 2,600 mm 102.3') 2,900 mm 114.7')
Floor space 2,540x2,190 mm (100x86.2') 2,920x2,190 mm (115x86.2')
weight 7,200 kgs (15840Lbs) 7,500 kgs (16500Lbs) 7,400 kgs (16280Lbs) 7,700 kgs (16940Lbs)
Power source
Electrical power supply 25 KVA/3PH, 220V 50/60HZ
Compressed air supply 6.0 kgf/cO (85psi) (0.6MPa)
Controller
  FANUC / HEIDENHAIN / SIEMENS
 
Edition / A08
* Specifications may different according to option accessories and are subject to change without notice.
 

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   

Switch to Mobile Version