IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
MCV850 / MCV1100
| Previous | 7 / 12 | Next |
| SPECIFICATION |
| MODEL | MCV850 | MCV1100 | ||
| Travel | ||||
| X-Axis | 850 mm(33.5') | 1100 mm(43.3') | ||
| Y-Axis | 600 mm(23.6') | |||
| Z-Axis | 100~660 mm(22.0') | |||
| Spindle nose to table | 70 - 530 mm(3.9-25.9') | |||
| Table | ||||
| Table size | 1050mm x 600mm(41.3-23.6') | 1300mm x 600mm(51.1-23.6') | ||
| Floor to table | 835 mm(33.6') | |||
| Max. table loading capacity | 1000 kgs(2200Lbs) | |||
| T-slot (no x Width x Pitch) | 6 x 18 x 100 mm ( 6 x 0.7' x 3.9' ) | |||
| Spindle center to column | 652 mm(25.6') | |||
| Feed system | ||||
| Rapid traverse speed | X/Y: 20 M/min ( 787.4'/min) , Z:15 M/min (590.6'/min) | |||
| Feed motor(FANUC) | X: 1.8kW (12Nm) , Y: 3.0kW (22Nm), Z: 4.2 kW(30Nm) | |||
| Ball screw diameter & pitch | X: 40 mm, Y/Z: 45 mm / 10 mm(0.39') | |||
| Cutting feedrate | 1-10,000 mm/min (0.04 - 393.7'/Min) | |||
| Type of transmission | Direct Drive | |||
| Spindle | ||||
| Type of tool shank |
ISO 40 (BT/CAT/DIN 69871A) |
ISO 50 (BT/CAT/DIN 69871A) |
ISO 40 (BT/CAT/DIN 69871A) |
ISO 50 (BT/CAT/DIN 69871A) |
| Max. spindle speed | 8,000 rpm / 10,000 rpm (Op) | 6,000 rpm / 8,000 rpm (Op) | 8,000 rpm / 10,000 rpm (Op) | 6,000 rpm / 8,000 rpm (Op) |
| Spindle motor | 75/11 kW / 11/15 kW (Op) | 15/18.5 kW / 22/26 kW (Op) | 75/11 kW / 11/15 kW (Op) | 15/18.5 kW / 22/26 kW (Op) |
| Type of transmission | Belt | |||
| ATC | ||||
| Tool storage capacity | 20T/24 or 32 or 40T (Op) | 24T / 30T (Op) | 20T/24 or 32 or 40T (Op) | 24T / 30T (Op) |
| ATC type | Armless type (Op) | Armless type | Armless type (Op) | Armless type |
| Max. tool diameter | 100/95/76/76 mm (3.9/3.7/3/3.3') | 110/127 mm (4.3/5') | 100/95/76/76 mm (3.9/3.7/3/3.3') | 110/127 mm (4.3/5') |
| Without adjacent tool | 180/185/127/127 mm (7.1/7.3/5/5') | 200/228 mm (7.9/9') | 180/185/127/127 mm (7.1/7.3/5/5') | 200/228 mm (7.9/9') |
| Max. tool length | 300 mm (11.8') | 300 mm (11.8') | 300 mm (11.8') | 300 mm (11.8') |
| Max. tool weight | 7 kg (15Lbs) | 15 kgs (33Lbs) | 7 Kg (15Lbs) | 15 kgs (33Lbs) |
|
Tool changing time (Tool to Tool) |
7 sec / 3.5 sec | 5 sec | 7 sec / 3.5 sec | 5 sec |
|
Tool changing time (Chip to Chip) |
11 sec / 5.5 sec | 7 sec | 11 sec / 5.5 sec | 7 sec |
| Method of tool selection | 20T by address code / Random selection | |||
| bi-directional magazine rotation | ||||
| Tool display | Yes | |||
| Special tool management | Yes | |||
| Coolant system | ||||
| Coolant tank size | 486 L ¡¡ | |||
| Coolant capacity | 105 L / min | |||
| Chip Flush capacity | 105 L / min | |||
| Machine size | ||||
| Machine height | 2,600 mm 102.3') | 2,900 mm 114.7') | 2,600 mm 102.3') | 2,900 mm 114.7') |
| Floor space | 2,540x2,190 mm (100x86.2') | 2,920x2,190 mm (115x86.2') | ||
| weight | 7,200 kgs (15840Lbs) | 7,500 kgs (16500Lbs) | 7,400 kgs (16280Lbs) | 7,700 kgs (16940Lbs) |
| Power source | ||||
| Electrical power supply | 25 KVA/3PH, £¬220V 50/60HZ | |||
| Compressed air supply | 6.0 kgf/c©O (85psi) (0.6MPa) | |||
| Controller | ||||
| FANUC / HEIDENHAIN / SIEMENS | ||||
| Edition / A08 |
| * Specifications may different according to option accessories and are subject to change without notice. |