IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
V700
Previous | 10 / 12 | Next |
SPECIFICATION |
MODEL | V700 |
Travel | |
X-Axis | 700 mm(27.5') |
Y-Axis | 400 mm(15.7') |
Z-Axis | 550 mm (21.6') / 650 mm (25.5') (Option) |
Spindle nose to table | 150~700 mm (5.9~27.5') / 150~800 mm (5.9~31.4') (Option) |
Table | |
Table size | 800 mm x 400 mm (31.5~15.7') |
Floor to table | 858 mm (33.77') |
Max. table loading capacity | 250kgs (551 Lbs) |
T-slot (number x width x pitch) | 3 x 18 mm x 100 mm(3x0.7' x 3.93') |
Spindle center to column | 500 mm (19.68') |
Feed system | |
Rapid traverse speed | X/Y/Z: 48 / 48 / 32 M/min |
Feed motor (FANUC) | X/Y : 1.8kW, Z: 3.0kW |
Ball screw diameter & pitch |
X: 32mm / 16mm (1.26/0.63') Y: 32mm / 16mm (1.26/0.63') Z: 32mm / 16mm (1.26/0.63') |
Cutting feed rate | 1~10000 mm/min |
Type of transmission | Direct Drive |
Spindle | |
Type of tool shank | BT 40 / CAT 40 / DIN 69871A |
Max. spindle speed | 10000 rpm / 12000 or 15000 rpm (Option) |
Spindle motor | 5.5 / 7.5 kW |
Type of transmission | Direct Drive |
ATC | |
Tool storage capacity | 24 T |
ATC type | Arm Type |
Max. tool diameter | 80 mm (3.14') |
Without adjacent tool | 150 mm (5.9') |
Max. tool length | 250 mm (9.84') |
Max. tool weight | 7 kg (14.14 Lbs) |
Tool changing time (Tool to Tool) | 2.0 sec |
Tool changing time (Chip to Chip) | 4.6 sec |
Method of tool selection | Random selection |
bi-directional magazine rotation | |
Tool display | None |
Special tool management | Yes (except FANUC 0l-Mate D) |
Coolant system | |
Coolant tank size | 200 L |
Coolant capacity | 150 L / min |
Chip Flush capacity | 150 L / min |
Machine size | |
Machine height | 2770 mm (84.4') |
Floor space | 1900 x 2284 mm (74.8' x 89.92') |
Weight | 3690 kgs (81.33 Lbs) |
Power source | |
Electrical power supply | 20 KVA / 3 PH , 220V 50/60HZ |
Compressed air supply | 6.0 kgf/cm² (85psi (0.6MPa) |
Controller | |
FANUC / HEIDENHAIN / MITSUBISHI / SIEMENS |
Edition / A01 |
* Specifications may different according to option accessories and are subject to change without notice |