IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+607-330 5686

V33 / V34

Previous 11 / 12 Next

V33 / V34 First


SPECIFICATION
 
Model V33 V43
Travel
X-Axis 850 mm ( 33.5 ' ) 1,100 mm ( 43.3 ' )
Y-Axis 600 mm ( 23.6 ' )
Z-Axis 510 mm ( 20.1 ' )
Spindle nose to table 120 - 630 mm( 4.7 X 24.8' )
Table
Table size 1,050 X 600 mm ( 41.3 X 23.6 ' ) 1,300 X 600 mm ( 51.2 X 23.6 ' )
Floor to table 855 mm ( 33.7 ')
Max. table loading capacity 1,000 kgs( 2200 Lbs )
T-slot (number x width x pitch) 6 X 18 mm X 100 mm( 6 X 0.7 X 3.9 ')
Spindle center to column 600 mm ( 23.6 ')
Feed system
Rapid traverse speed 32 M/min ( 1259.8 ' /min )
Feed motor (FANUC) X/Y: 3.0kW (12 Nm) , Z: 7.0kW (30 Nm)
Ball screw diameter & pitch X, Y : 45 mm ( 1.8 ' ) Z:50 mm ( 2.0' ) / 12mm ( 0.5' )
Cutting feed rate 1 - 10,000 mm/min ( 0.04-393.7 '/min )
Type of transmission Direct mounting
Spindle
Type of tool shank BT 40 / CAT 40 / DIN 69871A BT 50 / CAT 50 / DIN 69871A BT 40 / CAT 40 / DIN 69871A BT 50 / CAT 50 / DIN 69871A
Max. spindle speed 10,000 / 15,000 or 20,000 rpm (Op) 6,000 / 8,000 rpm (Op) 10,000 / 15,000 or 20,000 rpm (Op) 6,000 / 8,000 rpm (Op)
Spindle motor 11/15 kW / 7.5/11kW or 15/18.5 kW (Op) 15/18.5kW / 22/26kW (Op) 11/15 kW / 7.5/11kW or 15/18.5 kW (Op) 15/18.5kW / 22/26kW (Op)
Type of transmission Belt / Direct drive or Build-in (Op) Belt Belt / Direct drive or Build-in (Op) Belt
ATC
Tool storage capacity 24 Tools / 32 or 40 Tools (Op) 24 Tools / 32 or 40 Tools (Op) 24 Tools / 32 or 40 or 60 Tools (Op) 24 Tools / 32 or 40 Tools (Op)
ATC type Arm type
Max. tool diameter 95/76/76 mm
( 3.7/3.0/ 3.0' )
110/127/127 mm
(4.3/5/5')
95/76/76/76 mm
( 3.7/3.0 /3.0/3.0' )
110/127/127 mm
(4.3/5/5')
Without adjacent tool 185/127/127 mm
( 7.3/5.0/ 5.0' )
200/228/228 mm
( 7.9/9/ 9' )
85/127/127/127 mm
( 7.3/5.0/5.0/5.0' )
200/228/228 mm
( 7.9/9/ 9' )
Max. tool length 300 mm ( 11.8 ') 350 mm ( 13.8 ' ) 300 mm ( 11.8 ') 350 mm ( 13.8 ' )
Max. tool weight 7 kgs ( 15 Lbs ) 15 kgs ( 32 Lbs ) 7 kgs ( 15 Lbs ) 15 kgs ( 32 Lbs )
Tool changing time (Tool to Tool) 1.8/1.5/1.5 sec 2.9 sec 1.8/1.5/1.5/1.5 sec 2.9 sec
Tool changing time (Chip to Chip) 5.5 sec 6 sec 5.5 sec 6 sec
Method of tool selection Random selection
Bi-directional magazine rotation
Tool display Yes
Special tool management Yes
Coolant system
Coolant tank size 445L 486L
Coolant capacity 105 L / min
Chip Flush capacity 125 L / min
Machine size
Machine height 2,920 mm (115.0 ')
Floor space 3,955 mm ( 155.7 ')(W) X 2,250 mm ( 88.6 ' ) (D) 4,395 mm ( 173.0 ' ) (W) X 2,250 mm ( 88.6 ' )(D)
weight 8,200 kgs ( 18040 Lbs ) 8,500 kgs ( 18700 Lbs )
Power source
Electrical power supply 25 KVA / 3PH220V 50/60HZ
Compressed air supply 6.0 kgf/cO (85psi)
Controller
  FANUC / HEIDENHAIN / SIEMENS
 
Edition / A09
* Specifications may different according to option accessories and are subject to change without notice.
 

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   

Switch to Mobile Version