IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
V2000
| Previous | 12 / 12 | Next |
| SPECIFICATION |
| MODEL | V2000 | |||
| Travel | ||||
| X-Axis | 2050 mm(80.7') | |||
| Y-Axis | 1150 mm(45.27') | |||
| Z-Axis | 700 mm(27.55') | |||
| Spindle nose to table | 200 - 900 mm(8.87-35.43') | |||
| Table | ||||
| Table size | 2200mm x 1000mm(86.61x39.97') | |||
| Floor to table | 830 mm(32.67') | |||
| Max. table loading capacity | 3000 kgs (6600 Lbs) | |||
| T-slot (no x Width x Pitch) | 6 x 22mm x 160 mm ( 6 x 0.86' x 6.29' ) | |||
| Spindle center to column | During double columns: 1200 mm(47.2') | |||
| Feed system | ||||
| Rapid traverse speed | X/Y/Z: 30 / 30 / 16 M/min | |||
| Feed motor(FANUC) | X/: Ahpha 30-3000i Y/Z: Ahpha 22-3000i | |||
| Ball screw diameter & pitch |
X: 63mm/12mm(2.48/0.47') Y: 40mm/10mm(1.57/0.39') Z: 50mm/10mm(2/0.39') |
|||
| Cutting feedrate | 1-10,000 mm/min (0.04 - 393.7/Min') | |||
| Type of transmission | Direct Drive | |||
| Spindle | ||||
| Type of tool shank | BT40/CAT40/DIN 69871A | BT50/CAT50/DIN 69871A | ||
| Max. spindle speed | 10,000 / (Op) 12,000 / 15,000 rpm | 10,000 rpm | ||
| Spindle motor | 15/18.5 kW | 22/26 kW | ||
| Type of transmissiop | Direct Drive | Direct Drive / ZFGear Box (Op) | ||
| ATC | ||||
| Tool storage capacity | 30 / (Op) 40 / 60T | (Op) 90 / 120T | 32 / (Op) 40 / 60T | (Op) 90 / 120T |
| ATC type | Armless type | |||
| Max. tool diameter | 76 mm (2.99') | 90 mm (3.54') | 127 mm (5') | 127 mm (5') |
| Without adjacent tool | 127 mm (5') | 180 mm (7.08') | 228 mm (8.97') | 228 mm (8.97') |
| Max. tool length | 350 mm (13.77') | 350 mm (13.77') |
400/400/350 mm (15.74/15.74/13.77') |
400 mm (15.74') |
| Max. tool weight | 7 kg (15.43Lbs) | 7 kg (15.43Lbs) | 15 kg (33.06Lbs) | 15 kg (33.06Lbs) |
|
Tool changing time (Tool to Tool) |
2.5 sec | 1.6 sec | 3.5 sec | 3.57 sec |
|
Tool changing time (Chip to Chip) |
5.5 sec | 9.6 sec | 6.8sec | 11.57 sec |
| Method of tool selection | Random selection | |||
| bi-directional magazine rotation | ||||
| Tool display | Yes | |||
| Special tool management | Yes | |||
| Coolant system | ||||
| Coolant tank size | 600 L กก | |||
| Coolant capacity | 105 L / min | |||
| Chip Flush capacity | screw type | |||
| Machine size | ||||
| Machine height | 3481 mm (137') | |||
| Floor space | 5865x3474 mm (230.9x136.7') | 5865x3474 mm (230.9x136.7') | 5865x3474 mm (230.9x136.7') | 6865x3474 mm (270.2x136.7') |
| weight | 19500 kgs (8845Lbs) | 22942 kgs (10406Lbs) | 22110 kgs (10029Lbs) | 23600 kgs (10732Lbs) |
| Power source | ||||
| Electrical power supply | 60 KVA/3PH/220V 50/60HZ | |||
| Compressed air supply | 6.0 kgf/cm² (85psi) (0.6MPa) | |||
| Controller | ||||
| FANUC / HEIDENHAIN / SIEMENS | ||||
| Edition / A01 |
| * Specifications may different according to option accessories and are subject to change without notice. |