IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
GN SERIES
Previous | 11 / 14 | Next |
- SPECIFICATIONS
Model | unit | GN-40 | GN-50 | GN-60 | GN-70 | ||
Capacity | Center height | mm(inch) | 500(19.69') | 625(24.61') | 750(29.53') | 875(34.45') | |
Distance between centers | mm(inch) | 2000(79'), 3000(118'), 4000(158'), 5000(197'), 6000(236') | |||||
Swing over bed | mm(inch) | 1000(39.37') | 1250(49.21') | 1500(59.06') | 1750(68.90') | ||
Swing over gap | mm(inch) | 1500(59.06') | 1500(59.06') | ||||
Swing over cross slide | mm(inch) | 640(32.68') | 890(42.52') | 1140(52.36') | 1390(62.21') | ||
Width of bed | mm(inch) | 820 (32') | |||||
Bed way | 3V + 1 flat way | ||||||
Cross slide width | mm(inch) | 450 (17.72') | |||||
Gap width | mm(inch) | *650(25.6') | |||||
Headstock spindle | Spindle bore nose | mm(inch) | 155(6')(A2-11) / *250(10')(A2-15) / *305(12')(A2-20) / *380(15')(A2-2 /*534(21')(A2-28) | ||||
Spindle speed | rpm | (6' bore) 4-600/ 12' bore) 4-400 / *(15' bore) 4-300 (auto 4 steps) | |||||
Cross slide (X-axis) Carriage (Z-axis) |
Cross slide travel (X-axis) | mm(inch) | 750 (29.53') | ||||
Longitudinal travel (Z-axis) | mm(inch) | 2000(79'), 3000(118'), 4000(158'), 5000(197'), 6000(236') | |||||
AC servo motor (X-axis) | kw | 3 Fanuc / 3.3 Simens / 14.8 Nm Fagor | |||||
AC servo motor (Z-axis) | kw | 4 Fanuc / 4.4 Simens / 27.3 Nm Fagor | |||||
Dia of ball screw (X-axis) | mm | Φ40 x P5 x C3 | |||||
Dia of ball screw (Z-axis) | mm | Φ63 x P10 x C5 / *Φ80 x 12 x C5 (6000,7000,8000) | |||||
speed (X-axis) | mm/min | 6000 | |||||
Rapid traverse speed (Z-axis) | mm/mm | 6000 | |||||
Tailstock | Quill taper | MT #6 | |||||
Quill diameter | mm(inch) | Φ200 (7.87')/ *rotation290(11.42') | |||||
Quill travel | mm(inch) | 300 (11.81') | |||||
toolpost | Tool station | *horizontal type 4T / *horizontal type 6T | *vertical type 8T / *vertical type 10T | ||||
Size of external turning tool | mm | 32, 50 | 25, 32 | ||||
Motor | Main spindle | kw | /*37 [*40hp(40hp inverter) / *50hp(50hp inverter)] | ||||
Headstock lube pump | hp | 1 /4 | |||||
Headstock speed auto change x 2 | w | 60 | |||||
Lube system pump | w | 22 | |||||
Hydraulic oil pump | hp | 2 | |||||
Coolant pump | hp | 1/2 | |||||
Accuracy | Positioning | mm | +0.01 / 300 | ||||
Repeatability | mm | +0.005 | |||||
Spindle run-out | mm | +0.01 | |||||
Tank Capacity | Hydraulic tank | l | 80 | ||||
Controller | Controller brand | Simens Fagor Fanuc Mitsubishi | |||||
Controllable axis | 2 | ||||||
Weight | Net/Gross | kg (lb) | 9000(19800) | 10000(22000) | 11000(24200) | 12000(26400) | 13000(28600) |
Dimensions | Floor space guard) L x W x H | mm (inch) |
5000(197') x2500(98') x2400(95') |
6000(236') x2500(98') x2400(95') |
7000(276') x2500(98') x2400(95') |
8000(315') x2500(98') x2400(95') |
9000(354') x2500(98') x2400(95') |
* is option.
*distance between centers 7000 8000 are available.