IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
FBN-60B / 80B SERIES
| Previous | 13 / 14 | Next |
- SPECIFICATIONS
| Model | FBN-60B | FBN-80B | ||
| Capacity | Max cutting OD | mm | 1500 | 2000 |
| Max workpiece length | mm | 700 | ||
| Bed width | mm | 820 | 1200 | |
| Cross slide width | mm | 450 | ||
| Spindle bore / nose | mm | 155 / A2-11 | ||
| Headstock & main spindle | Spindle taper | MT #7 | ||
| Spindle speed range | rpm | 4-600 | 40-400 | |
| Spindle speed steps | 4 | |||
| Main motor | kw | 30 / *37 | ||
| Change speed motor | w | 60 x 2 | ||
|
Cross slide (X-axis) & Carriage (Z-axis) |
Cross slide travel (X-axis) | mm(inch) | 800 | 1200 |
| Longitudinal travel (Z-axis) | mm(inch) | 700 | ||
| Controller | Fanuc 0i-TF / Siemens 828D / Fagor 8055i | |||
| AC servo motor (X-axis) | kw | 3 | ||
| AC servo motor (Z-axis) | kw | 4 | ||
| Dia of ball screw (X-axis) | mm | Φ40 x P5 x C3 | ||
| Dia of ball screw (Z-axis) | mm | Φ50 x P10 x C5 | ||
| Rapid traverse speed (X-axis) | mm/min | 6000 | ||
| Rapid traverse speed (Z-axis) | mm/min | 8000 | ||
| Turret / toolpost | Tool station | *Quick change toolpost(manual) / *Electric horizontal type 4T | ||
| Tool shank | mm | 32 | ||
| Weight | Net/Gross | kgs(lb) | 6000 / 6800 | 7000 / 8000 |
| Dimensions | Floor size LxWxH | mm | 3300x2600x2500 | 3300*3250*3000 |
Main motor option: *40hp Taiwan made motor + 40hp inverter / *50hp Taiwan made motor + 50hp inverter