About MOMENTUM MVL-20/20M
ITEM | UNIT | MVL-20 | MVL-20M | |
CAPACITY | Max. Swing Diameter | mm (Inch) | Ø2,500 (98.42) | |
Max. Turning Diameter | mm (Inch) | Ø2,500 (98.42) | ||
Distance From Bite Holder End To Table Surface | mm (Inch) | 0 ̴ 1,850 (0 ̴ 72.83) | 0 ̴ 1,800 (0 ̴ 70.86) | |
Max. Turning Height | mm (Inch) | 1,800 (70.86) | 1,750 (68.89) | |
Max. Workplace Weight | kg | 15,000 | ||
TABLE | Table Diameter (Manual Chuck) | mm (Inch) | Ø 2,000 (78.74) | |
Range Of Table Speed (Low) | rpm | 13 ̴ 50 | ||
Range Of Table Speed (High) | rpm | 51 ̴ 200 | ||
Gear Speed | steps | 2 | ||
Max. Of Table Torque | N.m | 55,800 | ||
ATC | ATC (Automatic Tool Changer) | set | 1 | |
Number Of Tool Stations | Random | 12 | ||
Tool Type | T-Puller | BT-50 | ||
Tool Size | mm (Inch) | 25 / 32 / 40 (1” / 1.25” /1.5”) | ||
Cross Section Of Ram | mm (Inch) | 254 x 254 (10 x 10) | ||
TRAVEL | Horizontal Travel (X-Axis) | mm (Inch) | -1,300+1,510(-51.18+59.44),ref point | |
Vertical Travel (Z-Axis) | mm (Inch) | 1,250 (49.20) | ||
Cross Rail Travel | mm (Inch) | 1,120 (44.08), 4step (5 positions) | ||
FEED RATES | Rapid Rate (X-Axis) | m/min | 10 | |
Rapid Rate (Z-Axis) | m/min | 10 | ||
Cutting Feed Rate | mm/rev | 0.001 ~ 500 | ||
Feed Overide | % | 0 ̴ 150 | ||
MOTOR | Table Main Motor | kW (HP) | ᾳ60HVi, 60 /75 (80.4/100.5) | |
Feed Servo Motor (X Axis) | kW (HP) | ᾳ30i 7 (9.4) | ||
Feed Servo Motor (Z Axis) | kW (HP) | ᾳ30Bi 7 (9.4) | ||
Milling Spindle Motor | kW (HP) | - | ᾳP50i(22/30kw) | |
Cf Axis Motor | kW (HP) | - | ᾳ30i 7kw (9.4HP) | |
GENERAL | Machine Height | mm | 7070 (278.34) | |
Floor Space (L x W) | mm | 7060 x 6050 (277.95 x 238.18) | ||
Machine Weight | kgs | 45,000 | ||
•Specification is subject to change without further notice. |
Inquiry - VERTICAL TURNING MOMENTUM MVL-20/20M