IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
JN-NV900
| Previous | 2 / 3 | Next |
| Model | Unit | JN-NV900 | |
| Spindle | Tool Shank | - | BT40 |
| Speed | rpm | 8000 / 10000 / 18000 | |
| Transmission | - | Belt / Direct / Electric | |
| Bearing lubrication | - | Grease | |
| Cooling System | - | Oil cooled / water cooled | |
| Spindle motor max.rating | Kw(HP) | 11(15) | |
| Axis motor max.rating (MITSUBISHI) | Kw | 1.5/2.2/3.0 | |
| Axis motor max.rating (FANUC) | Kw | 1.8/1.8/2.5(std) / 3.0/3.0/4.0(opt) | |
| Table | Working area | Mm(inch) | 1000*500(39.4*19.7) |
| Max.loading | kg | 700 | |
| T-slots (No.*Width*Pitch) | Mm (inch) | 5*18*125(5*0.8*5.0) | |
| Travel | X axis | Mm (inch) | 900(35.4) |
| Y axis | Mm (inch) | 500/625(19.7/24.6) | |
| Z axis | Mm (inch) | 500(19.7) | |
| Spindle nose to table | Mm (inch) | 150-650(5.9-25.6) | |
| Spindle centre to solid column surface | Mm (inch) | 517/630(20.4/24.8) | |
| Feed Rates | Rapids on X/Y/Z axis | m/min | 36/36/36 |
| Max.Cutting Feedrate | m/min | 10/10/10 | |
| Tool Magazine | Tool storage capacity | pcs | 24/30 |
| Type of tool (optional) | type | BT40 | |
| Max.tool diameter | Mm(inch) | 85(3.3)arm | |
| Max.tool weight | kg | 7 | |
| Max.tool length | Mm(inch) | 300(11.8)arm | |
| Avg.chan ging time (ARM) | Tool to tool | Sec | 2.5 |
| Air source required | Kg/cm2 | 6 up | |
| Accuracy | Positioning (VDI3341) | Mm (inch) | 0.01(0.0004) |
| repeatability | Mm (inch) | 0.005(0.0002) | |
| Dimension | Machine weight | kg | 6000 |
| Power source required | KVA | 25 | |
| Shipping Floor Plan (L*W*H) water tank and chip conveyor not included | Mm (inch) | 2600*2300*2600(102.4*90.6*102.4) | |
| Floor plan (L*W*H) | Mm (inch) | 3468*2282*2618*(136.5*89.8*103.1) |